Research on vibration characteristics of ballastless track subgrade under frost boiling at subgrade bed
|更新时间:2026-06-25
|
Research on vibration characteristics of ballastless track subgrade under frost boiling at subgrade bed
Vol. 35, Issue 12, (2014)
作者机构:
1. 西南交通大学 土木工程学院,成都,610031
2. 西南交通大学 高速铁路线路工程教育部重点实验室,成都,610031
作者简介:
基金信息:
DOI:
CLC:U216.4
Online First:15 December 2014,
Published:2014
稿件说明:
移动端阅览
ZHANG Wen-chao, SU Qian, LIU Ting, et al. Research on vibration characteristics of ballastless track subgrade under frost boiling at subgrade bed[J]. 2014, 35(12).
DOI:
ZHANG Wen-chao, SU Qian, LIU Ting, et al. Research on vibration characteristics of ballastless track subgrade under frost boiling at subgrade bed[J]. 2014, 35(12).DOI:
Research on vibration characteristics of ballastless track subgrade under frost boiling at subgrade bed
The subgrade frost boiling under ballastless track is a special form of high-speed railway subgrade defects appearing in recent years. In order to study the effect of the frost boiling on dynamic characteristics of ballastless track subgrade
in-situ survey and train-induced vibration tests were carried out in Shanghai-Nanjing intercity railway defects section. The vibration characteristics of ballastless track subgrade under the condition of forst boiling are analyzed. The results show that the subgrade frost boiling mainly resulted from the high content of fine particles in graded gravel and the cracking in expansion joints and side joints of foundation plate. The frost boiling at subgrade bed reduces the support and constraint effect of subgrade on the ballastless track
and intensifies the vibration of ballasted track structure
especially to the foundation plate of ballastless track. The vibration amplification effect increases with the increase of train speed. The defect also changes vibration wave transmission between ballastless track and subgrade bed
which restricts the energy dissipation function of subgrade bed. When the train speed reaches 247 km/h
the amplitude of vibration displacement at the surface of subgrade reduces by 45%. The vibration displacement transfer function from the foundation plate to subgrade bed decreases by 2/3
and the value is between 0.22-0.39 in dynamic loading mainly frequency range (0~15Hz) of the subgrade.