Study of ultrasonic test and uniaxial compression test of jointed rock masses

SUN Xu-shu; LI Jian-lin; WANG Le-hua; CHEN Xing-zhou; LI Fei; CHENG Dong

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Study of ultrasonic test and uniaxial compression test of jointed rock masses

更新时间：2026-06-25

- Study of ultrasonic test and uniaxial compression test of jointed rock masses
- Vol. 35, Issue 12, (2014)
- 作者机构：
  
  1. 三峡大学水利与环境学院,湖北,宜昌,443002
  2. 三峡大学土木与建筑学院,湖北,宜昌,443002
  3. 西安科技大学建筑与土木工程学院,陕西,西安,710056
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU45
- Online First：15 December 2014，
  
  Published：2014
- 稿件说明：
移动端阅览
SUN Xu-shu, LI Jian-lin, WANG Le-hua, et al. Study of ultrasonic test and uniaxial compression test of jointed rock masses[J]. 2014, 35(12).
DOI：

SUN Xu-shu, LI Jian-lin, WANG Le-hua, et al. Study of ultrasonic test and uniaxial compression test of jointed rock masses[J]. 2014, 35(12). DOI：

摘要

为了获取节理岩体各向异性力学特性和声波传播规律的相互关系，通过制作圆柱形单一预制贯通节理试件，开展了7种不同倾角节理试件的超声波波速测试和单轴压缩试验。试验结果表明：（1）节理试件波速测试值离散性较大，但总体服从正态分布，波速平均值介于石膏试件和完整试件之间，波速随节理倾角增大呈线性递减；（2）不同倾角的节理面对节理试件力学特性的影响很大，在应力-应变关系、变形特征、强度特征和破坏模式上均表现出显著的各向异性特征；（3）节理试件的力学性质和超声波传播特性变化规律区别很大，采用超声波波速确定节理试件的力学参数会存在很大误差。

Abstract

In order to obtain interrelation between anisotropic mechanical characteristics of jointed rock masses and ultrasonic propagation variation

by making the cylinder samples with a precasted joint surface

the ultrasonic test and uniaxial compression test of jointed samples with 7 joint dips are conducted. The results show: (1) The ultrasonic wave velocity test values of jointed samples are discretization and obey the normal distribution. The average of wave velocity is between the intact samples and the gypsum samples

and decreases linearly with increase of joint dip. (2) The joint surface with various joint dips has a great influence on mechanical characteristics of jointed samples

so it has remarkable characteristics of anisotropy in stress-strain curve

deformation

strength and failure modes. (3) There is large difference between the mechanical characteristics of jointed samples and the ultrasonic wave propagation variation

and it will have a great error to determine the mechanical parameters via the ultrasonic wave velocity.

关键词

Keywords

references

Views

2751

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Experimental research on anisotropic mechanical characteristic of samples with single prefabricated joint

Mechanical and anisotropic properties of silty slates

Anisotropic characteristics and shear mechanical properties of different genetic structural planes

Deformation and strength anisotropy of columnar jointed rock mass with different cross-sectional shapes

Fractal characteristics of joint surface morphology of Pengshui shale and anisotropic characterization based on joint roughness coefficient

Related Author

SUN Xu-shu

LI Jian-lin

WANG Le-hua

BAI Jun-lei

JIANG Zhao-rong

LI Zhi-gang

XU Guang-li

HUANG Peng

Related Institution

College of Civil Science and Engineering, Yangzhou University

Faculty of Engineering, China University of Geosciences

Geological Survey Center in Wuhan, China Geological Survey

Hubei Institute of Hydrogeology and Engineering Geology

State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University

AI问答

⁰