Analysis of nonlinear response of soil pressure transducer in high-modulus soil

ZHANG Li-xiang; LUO Qiang; ZHANG Liang; LIU Gang; WEI Yong-quan; WENG Jun-qi

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Analysis of nonlinear response of soil pressure transducer in high-modulus soil

更新时间：2026-06-25

- Analysis of nonlinear response of soil pressure transducer in high-modulus soil
- Vol. 34, Issue 12, (2013)
- 作者机构：
  
  1. 西南交通大学高速铁路线路工程教育部重点实验室,成都,610031
  2. 中国水电顾问集团成都勘测设计研究院,成都,610072
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU432
- Online First：19 December 2013，
  
  Published：2013
- 稿件说明：
移动端阅览
ZHANG Li-xiang, LUO Qiang, ZHANG Liang, et al. Analysis of nonlinear response of soil pressure transducer in high-modulus soil[J]. 2013, 34(12).
DOI：

ZHANG Li-xiang, LUO Qiang, ZHANG Liang, et al. Analysis of nonlinear response of soil pressure transducer in high-modulus soil[J]. 2013, 34(12). DOI：

摘要

为掌握土压力传感器置于硬土介质中呈现的非线性响应特性，建立了传感器与土介质的相互作用模型，运用有限元分析了满足匹配误差稳定所需的传感器与土介质的模量比条件。进行了传感器的单体标定和级配碎石土介质标定试验，探讨了传感器非线性响应的主要影响因素。计算与试验表明，目前国内主流的双膜土压力传感器在量测硬土介质中的土压力时，由于模量偏小标定曲线非线性显著；土压力传感器单体标定曲线线性度较高且其模量基本稳定，表明土介质的模量变化是引起标定曲线非线性的主要因素；通过将传感器置于与使用环境相近的土介质中进行标定，并采用非线性修正可明显提高硬土介质中土压力量测的准确性。

Abstract

In order to grasp the nonlinear response characteristics of soil pressure transducer in high-modulus soil

based on the interaction of model of transducer with soil

the reasonable modulus ratio of transducer and soil medium was studied with FEM. And the main factors about nonlinear response of transducer was studied by monomer transducer calibration test and transducer calibration in graded broken stone medium. Based on the results of FEM and calibration test

some conclusions are drawn as follows. The modulus of domestic mainstream transducer is too low to satisfy the reasonable modulus ratio at present when used in high-modulus soil meadium

which leads to the significant nonlinear characteristics of calibration test curve. The monomer test curve is highly linear and the modulus of transducer is stable

which shows that the nonlinear characteristics of calibration test curve is mainly caused by the soil modulus’s change. The test precision can be significantly increased by calibrating the transducer in the same state soil as field test and correcting the calibration results nonlinearly.

关键词

Keywords

references

Views

1122

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study of nonlinear response of miniature earth pressure transducer in centrifugal force field

Analysis of matching error of monitored soil pressure on shield tunnels

Nonlinear seismic response analysis of high arch dam-irregular foundation- reservoir water system based on octree scaled boundary finite element method

Nonlinear dynamic response of pile structure under earthquake loading

Investigation on thickness selection method of sealing steel plate for CAES gas storage caverns

Related Author

ZHANG Li-xiang

WEI Yong-quan

ZHONG Xiao-chun

CHEN Deng-hong

ZHANG Xin-han

LIU Yun-hui

HU Hao-wen

LIU Yun-long

Related Institution

Anhui Transport Consulting & Design Institute Co., Ltd.

College of Civil Engineering, Hohai University

Hubei Key Laboratory of Disaster Prevention and Mitigation, China Three Gorges University

College of Civil Engineering and Architecture, China Three Gorges University

State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology

AI问答

⁰