Study of influence of joint protuberance on geogrid reinforcement performance by discrete element method

MIAO Chen-xi; ZHENG Jun-jie; CUI Ming-juan; XIE Ming-xing; ZHAO Jian-bin

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Study of influence of joint protuberance on geogrid reinforcement performance by discrete element method

更新时间：2026-06-25

- Study of influence of joint protuberance on geogrid reinforcement performance by discrete element method
- Vol. 35, Issue 4, (2014)
- 作者机构：
  
  1. 华中科技大学岩土与地下工程研究所,武汉,430074
  2. 山西省交通科学研究院黄土地区公路建设与养护技术交通行业重点实验室,太原,030006
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU411
- Online First：18 April 2014，
  
  Published：2014
- 稿件说明：
移动端阅览
MIAO Chen-xi, ZHENG Jun-jie, CUI Ming-juan, et al. Study of influence of joint protuberance on geogrid reinforcement performance by discrete element method[J]. 2014, 35(4).
DOI：

MIAO Chen-xi, ZHENG Jun-jie, CUI Ming-juan, et al. Study of influence of joint protuberance on geogrid reinforcement performance by discrete element method[J]. 2014, 35(4). DOI：

摘要

为研究筋土界面特性及节点突起对格栅加筋性能的影响，采用三维离散元方法，通过副颗粒的引入从构造上对节点处突起进行了模拟，并对含节点突起的三向土工格栅拉拔过程进行了仿真分析，系统研究了筋-土界面剪胀效应，揭示了宏观强度发展与细观组构演化的内在关联，明确了节点突起对格栅工作性能的改善。研究结果表明，傅里叶系数曲线与拉拔力曲线偏离较大，综合考虑法向接触力幅值与各向异性程度的组构演化系数更能准确反映宏观强度的发展；节点突起调整了纵肋内力分布，允许筋-土间发生较大程度的相对位移，更有助于材料性能的充分发挥。研究成果可为从细观角度优化格栅加筋性能提供参考。

Abstract

Effects of the interface characteristics between geogrid and soil and joint protuberance on the geogrid performance are investigated by three-dimensional discrete element method. To simulate the protuberant joint

minor particles are introduced; so that the pull-out test of triaxial geogrid with joint protuberance can be modeled thoroughly. Through analyzing the shear dilatancy effect of the interface between geogrid and soil

the inherent relationship between strength (macroscopic) and fabric anisotropy (microscopic) is revealed; meanwhile

the improvement of geogrid performance attributed to the protuberant joint is also proved. Numerical results show that larger deviation can be found between the curves of Fourier coefficient and pull-out force. In terms of the development of strength (macroscopic)

its accuracy can be obtained via considering normal contact force and fabric evolution coefficient which reflects the degree of anisotropy. Moreover

with the existence of protuberant joint

the internal force distribution of longitudinal rib can be homogenized; larger relative displacement between geogrid and soil will be allowed; and the material properties could be well performed. The research results can provide reference for optimizing the geogrid reinforcement performance microscopically.

关键词

Keywords

references

Views

1446

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Discrete element simulation of interface characteristic and frictional properties of triaxial geogrid

Discrete element simulation on aeolian sand-geogrid pull-out test with different boundary conditions

Study of mathematical model for piping development considering development of weak zone

Discrete element modeling of behaviors of coarse grained soils considering rolling resistance

Three-dimensional discrete element analysis of mechanical behavior of methane hydrate-bearing sediments

Related Author

MIAO Chen-xi

CUI Ming-juan

XIE Ming-xing

ZHAO Jian-bin

DU Wei

NIE Ru-song

LI Lie-lie

TAN Yong-chang

Related Institution

School of Civil Engineering, Central South University

MOE Key Laboratory of Engineering Structures of Heavy Haul Railway, Central South University

College of Water Resources and Hydropower, North China University of Water Resources and Electric Power

Xinjiang Railway Survey and Design Institute Co., Ltd.

Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University

AI问答

⁰