Numerical simulation for influences of pressure solution on thermo-hydro- mechanical coupling in granule aggregate rock
|更新时间:2026-06-25
|
Numerical simulation for influences of pressure solution on thermo-hydro- mechanical coupling in granule aggregate rock
Vol. 35, Issue 5, (2014)
作者机构:
中国科学院武汉岩土力学研究所 岩土力学与工程国家重点实验室,武汉,430071
作者简介:
基金信息:
DOI:
CLC:TU452
Online First:09 June 2014,
Published:2014
稿件说明:
移动端阅览
ZHANG Yu-jun, YANG Chao-shuai, XU Gang. Numerical simulation for influences of pressure solution on thermo-hydro- mechanical coupling in granule aggregate rock[J]. 2014, 35(5).
DOI:
ZHANG Yu-jun, YANG Chao-shuai, XU Gang. Numerical simulation for influences of pressure solution on thermo-hydro- mechanical coupling in granule aggregate rock[J]. 2014, 35(5).DOI:
Numerical simulation for influences of pressure solution on thermo-hydro- mechanical coupling in granule aggregate rock
The model of pressure solution for granular aggregates established by Taron et al is introduced into the FEM code for analysis of thermo-hydro-mechanical coupling in porous media developed by the first author. Aiming at a hypothetical model for nuclear waste disposal in an unsaturated quartz aggregate rock mass with a laboratory scale
two computational conditions are designed: (1) the porosity and the permeability of rock mass are functions of the pressure solution; (2) the porosity and the permeability are constants
then the corresponding numerical simulations for a disposal period of 4 years are carried out; and the states of temperatures
solute concentrations in the intergranular fluid film and at the pore space
removal and precipitation masses
porosities and permeabilities
pore pressures
flow velocities and stresses in the rock mass are investigated. The results show: at the end of the calculation in case 1
pressure solution makes the porosities and the permeabilities decrease to about 43%-54% and 4.4%-9.1% of their initial values; under the action of the release heat of nuclear waste
the negative pore pressures in case 1 and case 2 are about 1.0-1.25 and 1.0-1.1 times of the initial values respectively; so the former represents an obvious effect of pressure solution; the magnitudes and distributions of stresses within the rock mass in the two calculation cases are much the same.
Finite element analysis of influence of pressure solution of fracture aperture on T-H-M coupling in dual-porosity medium
Model of subgrade soil responding to change of atmosphere under evaporation and its influential factors
Numerical simulation of thermo-hydro-mechanical coupling in near field of model test for geological disposal of nuclear waste
Elastoplastic finite element analysis for influences of pressure solution on thermo-hydro-mechanical coupling in aggregate rock
Coupling mechanism of seepage and heat transfer in rock fracture based on physics-informed neural networks
Related Author
ZHANG Yu-jun
ZHANG Wei-qing
YANG Yang
YAO Hai-lin
LU Zheng
ZHANG Yu-jun
ZHOU Ying-bo
ZHANG Yu-jun
Related Institution
School of Civil Engineering, Southwest Jiaotong University
Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology
State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences
School of Mechanics and Civil Engineering, China University of Mining and Technology
State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering, China University of Mining and Technology