Model testing and numerical simulation study of evolutionary process of thrust load caused landslide
|更新时间:2026-06-25
|
Model testing and numerical simulation study of evolutionary process of thrust load caused landslide
Vol. 34, Issue 10, (2013)
作者机构:
中国地质大学 工程学院,武汉,430074
作者简介:
基金信息:
DOI:
CLC:P642.22
Online First:18 October 2013,
Published:2013
稿件说明:
移动端阅览
YONG Rui, HU Xin-li, TANG Hui-ming, et al. Model testing and numerical simulation study of evolutionary process of thrust load caused landslide[J]. 2013, 34(10).
DOI:
YONG Rui, HU Xin-li, TANG Hui-ming, et al. Model testing and numerical simulation study of evolutionary process of thrust load caused landslide[J]. 2013, 34(10).DOI:
Model testing and numerical simulation study of evolutionary process of thrust load caused landslide
A physical model has been developed to study the whole evolutionary process of thrust load caused landslide under the multi-stage loading of MTS electro-hydraulic servo loading and analysis system. The displacement and deformation of the thrust load caused landslide model’s top surface are non-consecutively monitored with advanced 3D laser scanning technology. On the basis of multi-fractal theory
the variation of multi-fractal dimension of displacement in the evolutionary process of thrust load caused landslide is studied through the experiment. The experimental results show that the deformation and failure mode of thrust load caused landslide are dominated by general shear failure and it presents explicit developing phased characteristics. When the slope is in margin compressing stage
the deformation on the surface of the landslide is formed as some parts moving forward and uplift on the margin of the landslide
and the multi-fractal dimensions of displacement are decreasing orderly. When the slope is in uniform deformation stage
obvious displacement can be seen on the surface of the landslide model and the deformation keeps spreading to the front and sides of it. Uplift phenomenon can be seen in some parts in the front and center. During this stage
the multi-fractal dimensions of displacement decrease firstly
and then increase. When the slope is in accelerating deformation stage
landslide model surface presents sustained
rapid and obvious deformation associated with horizontal
vertical expansion cracks in the front and center part of it. During this stage
the multi-fractal dimensions of displacement are increasing gradually. Based on the landslide physical model test
FLAC3D numerical software is used to simulate the evolutionary process of thrust load caused landslide. It is verified that evolutionary process of landslide can be divided into the above three stages. Also the simulation discloses that the attenuation of the stability coefficient of landslide is nonlinear and the attenuation rate is decreasing.
Calculation method of sliding surface stress based on segmented sliding surface stress measurement system
Surface displacement field measurement for landslide model test based on computer aided inspection
Feasibility exploring of application of distorted and compensated method to landslide model test
Application of infrared thermal radiation imaging technology to landslide physical model test
Physical model test and numerical simulation for anchor cable reinforcements of existing tunnel under action of landslide
Related Author
CHEN Huai-lin
YANG Tao
RAO Yun-kang
ZHANG Zhe
WU Hong-gang
XIE Jiang-wei
TENG Han-qing
MA Jun-wei
Related Institution
State Key Laboratory of Intelligent Construction and Maintenance for Geotechnical and Tunnel Engineering under Extreme Environments, Southwest Jiaotong University
China Northwest Research Institute Co., Ltd., of CREC
China Railway Academy Co., Ltd.
Key Laboratory of Geological Hazards on Three Gorges Reservoir Area of Ministry of Education, China Three Gorges University
Faculty of Engineering, China University of Geosciences