Study of anisotropic equivalent elastic parameters of jointed rock mass

DI Sheng-jie; XU Wei-ya; SHAN Zhi-gang

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Study of anisotropic equivalent elastic parameters of jointed rock mass

更新时间：2026-06-25

- Study of anisotropic equivalent elastic parameters of jointed rock mass
- Vol. 34, Issue 3, (2013)
- 作者机构：
  
  1. 中水顾问集团华东勘测设计研究院,杭州,310014
  2. 浙江大学滨海与城市岩土工程研究中心,杭州,310058
  3. 河海大学岩土力学与堤坝工程教育部重点实验室,南京,210098
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU452
- Online First：20 March 2013，
  
  Published：2013
- 稿件说明：
移动端阅览
DI Sheng-jie, XU Wei-ya, SHAN Zhi-gang. Study of anisotropic equivalent elastic parameters of jointed rock mass[J]. 2013, 34(3).
DOI：

DI Sheng-jie, XU Wei-ya, SHAN Zhi-gang. Study of anisotropic equivalent elastic parameters of jointed rock mass[J]. 2013, 34(3). DOI：

摘要

采用复合材料力学分析方法，针对规则节理岩体考虑坐标转换及刚度系数，建立各向异性等效弹性参数的解析公式。通过算例证明了解析公式的可行性，同时对规则节理岩体等效参数规律性进行了研究，分析在不同的节理刚度比值下等效弹性参数的变化规律。结合白鹤滩坝址区柱状节理岩体特征，探讨了其等效弹性参数取值和各向异性特征。研究表明：所采用方法在刚度取值相等时岩体可退化为各向同性介质，且该方法计算结果与实测结果较为吻合；同时发现柱体偏转对等效弹性参数的影响较大，偏转后水平向和铅直向弹性模量分别降低约54%和17%，根据曲线规律性，偏转角度越大，降低程度越高，等效弹性参数的曲线变化反映了其具有明显的各向异性特征。

Abstract

Analytical formulas of anisotropic equivalent elastic parameters are established by using mechanical method of complex material. An example is made to show the feasibility and efficiency of the analytical formulas. Meanwhile

the coordinate transformation and jointed factor of regular jointed rock mass are considered. The rules of equivalent elastic parameters of regular jointed rock mass are studied. Variation rules of equivalent elastic parameters under different jointed factors are analyzed. Combining with the properties of columnar jointed rock mass in Baihetan dam site

the anisotropic characteristics and values of elastic parameters are analyzed. The results show that the jointed rock mass can degenerate into isotropic medium when the stiffness is equal; and the calculated values by using the method in the paper are well in accord with the test results in the dam site. The cylinder deflection has more effect on the equivalent elastic parameters. The results also show that after deflection

the horizontal elastic modulus and vertical modulus are reduced by 54% and 17% respectively. According to the curves

the higher the angle of cylinder

the greater reduction the elastic modulus would have. This change rule of equivalent elastic parameters revealed obvious anisotropic property of columnar jointed rock mass.

关键词

Keywords

references

Views

1787

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Permeability tensor and seepage properties for jointed rock masses based on discrete fracture network model

Improvement of modified Cam-Clay model based on transformation of stress space

A kind of explanation of reversible dilatancy of soils

Analysis of characteristics and influencing factors of elastic modulus of jointed rock mass based on statistical constitutive relation

Fractal characteristics of joint surface morphology of Pengshui shale and anisotropic characterization based on joint roughness coefficient

Related Author

WANG Pei-tao

YANG Tian-hong

YU Qing-lei

LIU Hong-lei

XIA Dong

ZHANG Peng-hai

LIU Yuan-xue

SHI Jian-yong

Related Institution

Key Laboratory of Ministry of Education on Safe Mining of Deep Metal Mines, Northeastern University

School of Resources & Civil Engineering, Northeastern University

Research Institute of Geotechnical Engineering, Hohai University

Department of Civil Engineering, Logistical Engineering University

Research Institute of Geotechnical Engineering,Hohai University

AI问答

⁰