Model test on sidewall friction of open caisson

WANG Jian; LIU Yang; ZHANG Yu

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Model test on sidewall friction of open caisson

更新时间：2026-06-25

- Model test on sidewall friction of open caisson
- Vol. 34, Issue 3, (2013)
- 作者机构：
  
  1. 河海大学水资源高效利用与工程安全国家工程研究中心,南京,210098
  2. 河海大学水利水电学院,南京,210098
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU411
- Online First：20 March 2013，
  
  Published：2013
- 稿件说明：
移动端阅览
WANG Jian, LIU Yang, ZHANG Yu. Model test on sidewall friction of open caisson[J]. 2013, 34(3).
DOI：

WANG Jian, LIU Yang, ZHANG Yu. Model test on sidewall friction of open caisson[J]. 2013, 34(3). DOI：

摘要

沉井侧壁摩阻力的大小和分布是沉井结构设计以及助沉方法选择的依据。目前，其计算方法带有较强的经验性，计算结果与实际情况往往存在较大差异。为了进一步认识和掌握其分布规律，研制了能够直接测量沉井侧壁阻力的微型摩阻力仪，并对其准确性、稳定性和可靠性进行了验证；然后，利用该仪器以及静态应变测试系统等电测设备开展沉井下沉阻力的模型试验。试验表明：随着入土深度的增加，沉井侧壁摩阻力的变化特征可分为3个阶段，在第1阶段，侧壁摩阻力随深度的增加接近线性增加；在第2阶段，随着深度的增加，侧壁摩阻力总体仍是上升的，但其上升速率则有所降低，在下沉一定深度后，摩阻力达到峰值；在第3阶段，侧壁摩阻力随入土深度的增加而逐渐减小。运用极限分析理论，对上述变化规律的原因进行了分析。上述试验及分析成果可作为现场原位测试数据的补充，两者共同为沉井下沉阶段的侧壁摩阻力计算研究提供基础数据支持。

Abstract

The magnitude and distribution of sidewall friction of open caisson are very important to caisson structure design and the selection of sinking-aid methods. However

the computation of sidewall friction is still quite empirical

which often leads to significant deviations from real situation. In order to further understand and master the distribution rule of the sidewall friction of open caisson during the process of sinking

a new type of micro-friction-sensor is invented to measure the sidewall friction directly; and its accuracy

stability and reliability are verified. Then

it is used in model test along with static strain test system. The result shows that the variation characteristics of sidewall friction can be divided into three phases with the increase of sinking depth. In phase one

the increase of sidewall friction and depth is close to linear relation; in phase two

the sidewall friction keeps increasing with depth

yet the rate of increase drops and the value reaches the peak at a particular depth; in phase three

the sidewall friction drops gradually with the increase of depth. The mechanism of this phenomenon is analyzed with theory of limit analysis. The test result can be treated as a complement of in-situ monitoring

and both provides fundamental data for analytical and numerical computation for sidewall friction of open caisson.

关键词

Keywords

references

Views

1887

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Discussion on test models of anchor plates based on block set mechanism

Sealing system design and model testing of lining structures for artificial underground gas storage caverns in medium-hard rock strata

Calculation method of sliding surface stress based on segmented sliding surface stress measurement system

Experimental study on vacuum combined with electro-osmosis for reinforcing ultrafine particle dredged soil

Experimental study on drainage performance of reinforced improved soft rock residual soil under rainfall conditions

Related Author

YU Sheng-bing

HUANG Mao-song

CAO Xiao-yong

LIU Rui-hui

LI Jian-fei

YE Xin-xin

GENG Jun-yang

TAN Hai-xing

Related Institution

Department of Geotechnical Engineering, Tongji University

Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University

School of Highway, Chang’an University

CCCC First Highway Consultants Co., Ltd.

State Key Laboratory of Intelligent Construction and Maintenance for Geotechnical and Tunnel Engineering under Extreme Environments, Southwest Jiaotong University

AI问答

⁰