Experimental study of cumulative axial strain and residual dynamic modulus of silt soil
|更新时间:2026-06-25
|
Experimental study of cumulative axial strain and residual dynamic modulus of silt soil
Vol. 34, Issue 4, (2013)
作者机构:
1. 浙江大学 岩土工程研究所,杭州,310027
2. 浙江大学 软弱土与环境土工教育部重点试验室,杭州,310027
作者简介:
基金信息:
DOI:
CLC:TU411.8
Online First:16 April 2013,
Published:2013
稿件说明:
移动端阅览
BIAN Xue-cheng, LU Wen-bo, JIANG Hong-guang, et al. Experimental study of cumulative axial strain and residual dynamic modulus of silt soil[J]. 2013, 34(4).
DOI:
BIAN Xue-cheng, LU Wen-bo, JIANG Hong-guang, et al. Experimental study of cumulative axial strain and residual dynamic modulus of silt soil[J]. 2013, 34(4).DOI:
Experimental study of cumulative axial strain and residual dynamic modulus of silt soil
Traffic loading from trains or vehicles will cause damages in transportation infrastructure constructed on silt soil
and consequently result in reduction of transportation infrastructure’s availability. In order to investigate cumulative deformation and dynamic behaviors of silt soil under large cycles of traffic loading
a series of dynamic triaxial tests have been conducted on Qiantang River silt soil. Effect of soil’s physical properties
such as relative compaction(RC)
water content and loading features
and loading frequency
confining pressure and cyclic stress ratio(CSR) on soil’s axial strain
dynamic modulus
damping ratio have been discussed based on the test data. The results show that the critical cyclic stress ratio(CSR) of Qiantang River silt soil is about 0.11. When the applied dynamic stress is below the critical dynamic stress
silt soil’s dynamic modulus shows very little reduction; and the cumulative axial strain is very small. When dynamic stress exceeds the critical dynamic stress
soil’s dynamic modulus reduces quickly
and the residual dynamic modulus can reach about 20% of the initial elastic modulus. Meanwhile
the dynamic modulus and damping ratio change significantly with the axial strain. The test data on silt soil’s dynamic modulus and damping ratio show a uniform conclusion after normalization on the data. Silt soil’s dynamic modulus almost keeps constant when the axial strain (or the normalized cycle number) is less than a threshold value
and decreases exponentially when beyond it and reaches a stable value ultimately. The damping ratio develops exponentially with the axial strain (or the normalized cyclic number).