Experimental study of deformation behavior of rock joints under cyclic shear loading

LIU Bo; LI Hai-bo; LIU Ya-qun

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Experimental study of deformation behavior of rock joints under cyclic shear loading

更新时间：2026-06-25

- Experimental study of deformation behavior of rock joints under cyclic shear loading
- Vol. 34, Issue 9, (2013)
- 作者机构：
  
  中国科学院武汉岩土力学研究所岩土力学与工程国家重点实验室,武汉,430071
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU452
- Online First：13 September 2013，
  
  Published：2013
- 稿件说明：
移动端阅览
LIU Bo, LI Hai-bo, LIU Ya-qun. Experimental study of deformation behavior of rock joints under cyclic shear loading[J]. 2013, 34(9).
DOI：

LIU Bo, LI Hai-bo, LIU Ya-qun. Experimental study of deformation behavior of rock joints under cyclic shear loading[J]. 2013, 34(9). DOI：

摘要

以水泥砂浆为相似材料，制备3种岩壁强度、5种起伏角度的锯齿型节理试样；利用试验设备，进行了在4种法向应力下的循环剪切试验。根据试验结果，结合循环剪切试验特点，定义剪胀角来表征节理循环剪切的法向变形特性，以及剪切刚度来表征节理循环剪切的切向变形特性。基于不同起伏角、不同强度等级和不同法向应力下的节理试样循环剪切试验结果，分析了循环剪切过程中剪胀角和剪切刚度的变化规律；并利用不同条件下的试验结果，对比分析初始起伏角度、法向应力、岩壁强度对节理循环剪切变形特性的影响规律。研究发现：剪胀角、剪切刚度均随着剪切循环次数的增加而呈现先快、后慢的降低趋势，并且中低起伏角度节理的剪胀角、剪切刚度的降低趋势随着初始起伏角度、法向应力的增加而加快，随着岩壁强度增加而变慢，高起伏角度节理的剪胀角、剪切刚度的降低趋势基本保持不变。

Abstract

Using cement-mortar as similar material

joint specimen with three joint wall strengths and five asperity angles are prepared. Then a series of cyclic shear tests are performed at four normal stresses on the cyclic shear test apparatus. Based on the test results and loading characteristics

the dilation angle and shear stiffness are defined. The normal deformation of joints under cyclic shear is characterized by dilation angle

and the tangential deformation is characterized by shear stiffness. Based on a variety of cyclic shear test results

the relationships between dilation angle and shear stiffness with shear cycles are analyzed. By comparing the results of different experimental conditions

the effects of initial asperity angles

joint wall strength and normal stress on the joint deformation properties are also analyzed. Research discovers that

the dilation angle and shear stiffness all appear a first quick back slow downward trend with the increase of cycle number. For the joint specimens with low and medium asperity angles

downward trend for dilation angle and shear stiffness shows an accelerating tendency with the increase of initial asperity angles and normal stress; but show a decelerating tendency with the increase of joint wall strengths. For the joint specimens with higher asperity angles

the downward trend for dilation angle and shear stiffness keep mainly unchanged.

关键词

Keywords

references

Views

2221

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study of mechanical characteristics of simulated rock joints with second-order asperity under cyclic shear loading

Study of deformability behaviour and failure mechanism by simulating rock joints sample under different loading conditions

Experimental study of cyclic shear stiffness and damping ratio of carbonate sand-steel interface

Longitudinal deformation of existing tunnel due to underlying shield tunneling

Parameter sensitivity of rock mass integrity for a pilot underground crude oil storage caverns during construction phase

Related Author

ZHU Xiao-ming

LI Hai-bo

LIU Bo

LI Hai-bo

LIU Bo

FENG Hai-peng

ZHANG Lei-qi

RUI Sheng-jie

Related Institution

Gansu Province Transportation Planning, Survey and Design Institute Co., Ltd.

State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences

China Guangdong Nuclear Power Station Engineering Co., Ltd.

Nanyang Reconnaissance and Design Institute

Key Laboratory of Offshore Geotechnics and Material of Zhejiang Province, Zhejiang University

AI问答

⁰