Numerical analysis method for optimizing charging structure of deep-hole blasting and its application

LIU You-ping; GONG Min; HUANG Gang-hai

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Numerical analysis method for optimizing charging structure of deep-hole blasting and its application

更新时间：2026-06-25

- Numerical analysis method for optimizing charging structure of deep-hole blasting and its application
- Vol. 33, Issue 6, (2012)
- 作者机构：
  
  1. 北京科技大学土木与环境工程学院,北京,100083
  2. 南昌工程学院土木与建筑工程学院,南昌,330099
  3. 中国科学院武汉岩土力学研究所,武汉,430071
- 作者简介：
- 基金信息：
- DOI：
  CLC： TD853
- Online First：14 June 2012，
  
  Published：2012
- 稿件说明：
移动端阅览
LIU You-ping, GONG Min, HUANG Gang-hai. Numerical analysis method for optimizing charging structure of deep-hole blasting and its application[J]. 2012, 33(6).
DOI：

LIU You-ping, GONG Min, HUANG Gang-hai. Numerical analysis method for optimizing charging structure of deep-hole blasting and its application[J]. 2012, 33(6). DOI：

摘要

针对地下深孔爆破采矿过程中常出现的爆破后冲作用严重以及爆破块度不均匀等若干问题，以南方某铅锌矿实际采用的爆破、炸药和岩石参数为基础，采用ANSYS/LS-DYNA对矿山拟采用的不同装药量、不同耦合系数的6种装药结构建立了数值计算模型。通过分析爆炸仿真过程中的Von Mises有效应力信息，结合爆破破岩机制及Mises屈服理论，确定了深孔爆破的最佳炮孔装药结构。现场试验表明，优化的装药结构爆破块度均匀且爆破后冲作用得到有效控制，基本上解决了矿山深孔侧向爆破存在的问题，研究结果为深孔爆破的优化设计提供理论依据和技术支持。

Abstract

There are usually several problems during underground mine’s deep-hole blasting，such as large blasting back impact effect

non-uniform pieces and so on. In order to solve the problems in a southern lead-zinc mine

ANSYS/LS-DYNA is used to build numerical models for six kinds of hole’s charging structure with different charging quantities and different coupling coefficients based on parameters of blasting

explosives and rock in this mine. By analyzing information of Von Mises effective stress of blasting simulation

combining with mechanism of rock crack during blasting and Mises yield criterion

the best hole’s charging structure for deep-hole blasting is determined. In-situ test shows that

the optimized charging structure gets uniform blasting pieces; and back impact effect is controlled effectively. Problems of deep-hole lateral blasting in the mine is basically solved

so as to provide optimization of deep-hole blasting’s design with theoretical foundation and technical support.

关键词

Keywords

references

Views

2377

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Determination of engineering parameters based on mutable characteristics of monitored values in numerical simulation

Mechanism of rock strata movement caused by underground mining in Chengchao iron mine

Solution of structure body and its stability calculation in stope

Experimental research on rules of acoustic emission and microseismic effects of burst failure of compound coal-rock samples

An experimental study of gas permeabilities of outburst and nonoutburst coals under complete stress-strain process

Related Author

CHENG Guan-wen

CHEN Cong-xin

SHEN Qiang

FU Hua

XIA Kai-zong

CHEN Qing-fa

ZHAO You-ming

CHEN De-yan

Related Institution

Center for Rock Instability and Seismicity Research, Dalian University of Technology

State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences

Guangxi Bureau of Coal Geology

College of Resources and Metallurgy, Guangxi University

State Key Laboratory of Deep Coal Mining and Environment Protection, Huainan Mining Industry Group

AI问答

⁰