Evaluation of strength reduction factor by lower bound limit analysis using finite element method

LI Chun-guang; ZHU Yu-fei; LIU Feng; DENG Qin; ZHENG Hong

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Evaluation of strength reduction factor by lower bound limit analysis using finite element method

更新时间：2026-06-25

- Evaluation of strength reduction factor by lower bound limit analysis using finite element method
- Vol. 33, Issue 6, (2012)
- 作者机构：
  
  中国科学院武汉岩土力学研究所岩土力学与工程国家重点实验室,武汉,430071
- 作者简介：
- 基金信息：
- DOI：
  CLC： O242.21
- Online First：14 June 2012，
  
  Published：2012
- 稿件说明：
移动端阅览
LI Chun-guang, ZHU Yu-fei, LIU Feng, et al. Evaluation of strength reduction factor by lower bound limit analysis using finite element method[J]. 2012, 33(6).
DOI：

LI Chun-guang, ZHU Yu-fei, LIU Feng, et al. Evaluation of strength reduction factor by lower bound limit analysis using finite element method[J]. 2012, 33(6). DOI：

摘要

对于岩土工程中常用的强度折减系数，其规划问题是非线性的，不能直接利用线性规划进行求解。基于四边形单元的下限原理有限元法，根据强度折减系数与超载系数近似符合双曲函数的特点，通过调整强度参数使得超载系数逼近于1[1]，可将边坡稳定性分析中常用的强度折减系数的非线性规划求解转化为线性规划求解问题。分析表明，采用拟合双曲线插值法求解强度折减系数的计算效率高于常规的二分法及割线法，且具有较好的收敛性；该方法能够充分利用当前高效的线性规划算法，便于工程应用。

Abstract

For the strength reduction factor commonly used in geotechnical engineering

its lower limit programming problem is nonlinear and can’t be solved directly by linear programming. Based on the lower limit method and the feature of strength reduction factor and overload factor

the strength reduction factor can be obtained by adjusting the shear strength when the overload factor approach to 1

and thus linear programming algorithm can be fully used. It is shown that the fitted hyperbolic curve method is more efficient and has larger convergence range than conventional methods

such as bisection method and secant method. Suggested method can take full advantage of the efficientcy of linear programming

and is also suitable for application in engineering.

关键词

Keywords

references

Views

1622

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Analytic approach of slope multi-slip surfaces based on local strength reduction method and its application

Reliability analysis of slope dynamic stability based on strength reduction FEM

Large deformation fem analysis of slopes fallure

Comparing a new double reduction method to classic strength reduction method for slope stability analysis

Progressive fracture evolution and mechanical response of cavity-containing sandstone under low-frequency disturbance

Related Author

LI Xiao-chun

YUAN Wei

BAI Bing

SHI Lu

WU Ying-xiang

LIU Dong-sheng

SONG Qiang-hui

OU Yi-hong

Related Institution

State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences

Department of Civil Engineering, Logistical Engineering University

Chongqing Key Laboratory of Geomechanics & Geoenvironmental Protection, Logistical Engineering University

Chongqing Bureau of Geology and Minerals Exploration

Key Laboratory of Mechanics on Disaster and Environment in Western China of Ministry of Education, Lanzhou University

AI问答

⁰