Experimental study of influence of joint space and joint angle on rock fragmentation by TBM disc cutter

ZOU Fei1; 2; LI Hai-bo; ZHOU Qing-chun; MO zhen-ze; ZHU Xiao-ming; NIU Lei

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Experimental study of influence of joint space and joint angle on rock fragmentation by TBM disc cutter

更新时间：2026-06-25

- Experimental study of influence of joint space and joint angle on rock fragmentation by TBM disc cutter
- Vol. 33, Issue 6, (2012)
- 作者机构：
  
  1. 中国科学院武汉岩土力学研究所岩土力学与工程国家重点实验室,武汉,430071
  2. 贵州省质安交通工程监控检测中心有限责任公司,贵阳,550000
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU45
- Online First：14 June 2012，
  
  Published：2012
- 稿件说明：
移动端阅览
ZOU Fei1, 2, LI Hai-bo, et al. Experimental study of influence of joint space and joint angle on rock fragmentation by TBM disc cutter[J]. 2012, 33(6).
DOI：

ZOU Fei1, 2, LI Hai-bo, et al. Experimental study of influence of joint space and joint angle on rock fragmentation by TBM disc cutter[J]. 2012, 33(6). DOI：

摘要

为了研究岩体节理参数（节理间距和节理倾角）对全断面岩石掘进机（TBM）盘形滚刀破岩效果的影响，对实际条件进行简化，在改进的试验装置上进行压头作用下相似材料的变形、破坏试验。采集整个加载过程中压头的侵入深度和荷载数据，并采用相机实时拍摄，获得试件表面破坏的发展过程以及最终破坏形态。试验结果表明，当节理倾角一定时，随着节理间距增大，达到跃进点的贯入荷载值增加，侵入功以及主裂纹扩展能量也都呈增大趋势，当 =0°、90°时，抗侵入系数基本一致，当 = 30°、60°时，抗侵入系数逐渐增大。当节理间距一定时，随着角度的增加，跃进点荷载、抗侵入系数、侵入功以及主裂纹扩展能量都呈现先减小后增大趋势，在 =30°时，各值都为最小值。根据试件破坏后形态分析发现，节理的空间特征对裂纹扩展模式有明显的控制作用，对破坏区域的形成也有明显的限制。

Abstract

To study the rock joint parameters

joint space and joint angle of rock fragmentation by full face rock tunnel boring machine (TBM) disc cutter

the test of high-strength gypsum specimen penetrated by wedge indentation is applied. Data of penetration depth and loads during the loading process are collected. Shooting with the camera in real time

photograph of the specimen surface damage and failure mode of the development process are taken. The results show that: when joint angle is constant

a greater joint space needs a greater penetration load when loading value drops

it also needs greater penetration power and crack propagation energy; when joint angle equals to 0 and 90

anti-invasive factor is consistent. When the joint angle equals to 30 and 60

with the increase of joint space

anti-invasive factor increases. When the joint spacing is constant

with the increase of the angle

the peak load

penetration power and crack propagation energy decrease and then increase. When joint angle equals to 30

the values are the minimum. According to a morphological analysis after the destruction of specimens

it is found that the spatial characteristics of joints crack obviously control the crack mode and have significant limitations for the damage region .

关键词

Keywords

references

Views

1953

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical research on rock fragmentation process by disc cutter

Theoretical model developed for equivalent elastic modulus estimation of cobblestone-soil matrix

Scale model test on laser-assisted rock indentation by TBM disc cutter indenter

Relationships between tunneling parameters of TBM and rock chip characteristics based on image analysis

Optimal design of lining structure in artificial cavern of compressed air energy storage

Related Author

ZHANG Jia

ZHU Yi

XU Zi-jun

XIA Yi-min

LI Jian-fang

TAN Qing

YU Qi-fu

ZHANG Jian-kang

Related Institution

School of Mechanical and Electrical Engineering, Central South University

State Key Laboratory of High Performance Complex Manufacturing, Central South University

College of Mechanical Engineering, Xiangtan University

School of Civil Engineering, Southwest Jiaotong University

College of Water Resource and Hydropower, Sichuan University

AI问答

⁰