Comparison between unreinforced and soil nail-reinforced cohesive soil slopes under load condition in centrifuge model tests
|更新时间:2026-06-25
|
Comparison between unreinforced and soil nail-reinforced cohesive soil slopes under load condition in centrifuge model tests
Vol. 32, Issue S1, (2011)
作者机构:
清华大学 水沙科学与水利水电工程国家重点实验室,北京,100084
作者简介:
基金信息:
DOI:
CLC:TU443
Online First:16 May 2011,
Published:2011
稿件说明:
移动端阅览
CAO Jie, ZHANG Ga, WANG Li-ping. Comparison between unreinforced and soil nail-reinforced cohesive soil slopes under load condition in centrifuge model tests[J]. 2011, 32(S1).
DOI:
CAO Jie, ZHANG Ga, WANG Li-ping. Comparison between unreinforced and soil nail-reinforced cohesive soil slopes under load condition in centrifuge model tests[J]. 2011, 32(S1).DOI:
Comparison between unreinforced and soil nail-reinforced cohesive soil slopes under load condition in centrifuge model tests
In order to investigate the bearing behavior and deformation rules of cohesive soil slopes during crest loading
centrifuge model tests of unreinforced slope and soil nail-reinforced slope were conducted. The loading and deformation process were observed and measured. Based on the comparison of bearing capacity and deformation rules between the unreinforced and soil nail-reinforced slope
the results show that soil nails improve the bearing capacity of slope obviously by confining the displacement toward slope surface. The deformation on the weakest location-footing edge is enhanced due to a nail-influence zone formed in reinforced slope; compression deformation of soil in middle and upper parts of slope is increased and shear deformation of which is decreased
resulting in the strengthening of slope stability. Soil nails in upper parts of reinforced slope has much more significant effects on reinforcing as load increased. Also in middle and lower parts of slope
the interaction between soil and nails becomes intensive near the slope surface.