The geological conditions of the high and steep abutment slope at left bank of Jinping-I Hydropower Project are very complicated

mainly developed with the faults of f5

f8

f42-9

the lamprophyre veins of X

the release fractures oriented parallel to slope surface and deep fractures. The combination of the fault of f42-9

the lamprophyre veins of X and the deep fracture of SL44-1 form a tensile dehiscent deformable body at the abutment slope of the left bank; the stability of the abutment slope is very bad during construction

especially when the slope is excavated to the elevation of 1 780 m

all rock masses that prevent the tensile dehiscent deformable body from sliding are excavated; the outcrop of the fault of f42-9 at the surface of the excavated slope makes the stability of the tensile dehiscent deformable body abruptly become worse. The strength reduction FEM considering excavation process is applied to calculate the stability safety factor of the abutment slope; and a new slope instability criterion is proposed as follows: in finding the mutant site on the relationship curves between of key points and the strength reduction factors

the critical state of instability of the slope could be determined; in this criteria

which stands the change rate of horizontal displacement with the strength reduction factors

is the ratio of the horizontal displacement’s increment and the strength reduction factor’s increment. Comparing with other slope instability criteria

a new criterion is proved to be a reasonable and practical slope instability criterion; based on this criterion

the stability safety factors are calculated when the slope is excavated and reinforced to different elevations; the overall stability and security of the abutment slope at the left bank are reasonably evaluated during its construction.