Tension model test research on grouted bolts foundation in jointed rock masses for transmission lines

SUN Yi-zhen; ZHENG Wei-feng; FAN Zhi-qiang

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Tension model test research on grouted bolts foundation in jointed rock masses for transmission lines

更新时间：2026-06-25

- Tension model test research on grouted bolts foundation in jointed rock masses for transmission lines
- Vol. 33, Issue 1, (2012)
- 作者机构：
  
  1. 大连理工大学工程力学系,辽宁,大连,116024
  2. 大连理工大学工业装备结构分析国家重点实验室,辽宁,大连,116024
  3. 中国电力科学研究院工程力学研究所,北京,100055
  4. 中交第二航务工程勘察设计院有限公司广州分公司,广州,511442
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU47
- Online First：17 January 2012，
  
  Published：2012
- 稿件说明：
移动端阅览
SUN Yi-zhen, ZHENG Wei-feng, FAN Zhi-qiang. Tension model test research on grouted bolts foundation in jointed rock masses for transmission lines[J]. 2012, 33(1).
DOI：

SUN Yi-zhen, ZHENG Wei-feng, FAN Zhi-qiang. Tension model test research on grouted bolts foundation in jointed rock masses for transmission lines[J]. 2012, 33(1). DOI：

摘要

针对输电线路注浆锚杆基础特点，根据相似理论设计了节理化岩体注浆锚杆基础抗拔模型试验，模型设计中考虑了岩石弹性模量、浆体弹性模量、节理迹长、节理倾角、锚杆埋深5个因素的变化，选择5因素4水平的正交试验方法进行了模型试验研究。结果表明，岩石弹性模量对注浆锚杆基础抗拔力的影响最大，其次为锚杆埋深、节理倾角、浆体弹性模量、节理迹长。试验过程中以剪切破坏和开裂破坏为主，并以此分析了注浆锚杆的传力机制，得出浆体与锚杆和岩体之间的黏结强度是控制试验结果的主要因素，影响着锚杆的极限抗拔力和破坏状态，在施工过程中应注意质量控制。

Abstract

According to the character of grouted bolts foundation in jointed rock masses for transmission lines

the model tests are designed based on the similarity theory. The model tests are carried out with focus on the following five factors: elasticity modulus of rock

elasticity modulus of mortar

trace lengths and joint inclination angle in rock mass

embedding depth of the bolt in the rock mass on four different levels of every factor. The experimental results reveal that the elasticity modulus of rock is the most important and sensitive factor influencing the pullout strength of grouted bolt foundation

and the factors next are embedding depth of the bolt in the rock mass

joint inclination angle in rock mass

elasticity modulus of mortar and trace lengths in rock mass. The destruction forms in the model tests are mainly shear failure and split failure. The force transferring mechanism of the bolt is also analyzed. It is concluded that the bond strength between the mortar and the rock

the mortar and the bolt are the main factors controlling test results and affecting the pullout strength of the bolt and failure status. It should be paid more attention to control the quality in the procedure of construction.

关键词

Keywords

references

Views

1621

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Sealing system design and model testing of lining structures for artificial underground gas storage caverns in medium-hard rock strata

Calculation method of sliding surface stress based on segmented sliding surface stress measurement system

Experimental study on vacuum combined with electro-osmosis for reinforcing ultrafine particle dredged soil

Experimental study on drainage performance of reinforced improved soft rock residual soil under rainfall conditions

Model test of deformation and failure mechanism of gravel soil bank slope under rainfall and reservoir water level

Related Author

CAO Xiao-yong

LIU Rui-hui

LI Jian-fei

YE Xin-xin

GENG Jun-yang

TAN Hai-xing

CHEN Huai-lin

YANG Tao

Related Institution

School of Highway, Chang’an University

CCCC First Highway Consultants Co., Ltd.

State Key Laboratory of Intelligent Construction and Maintenance for Geotechnical and Tunnel Engineering under Extreme Environments, Southwest Jiaotong University

China Northwest Research Institute Co., Ltd., of CREC

China Railway Academy Co., Ltd.

AI问答

⁰