Stability analysis of large shield working well considering effect of diaphragm wall joint

CHU Yi-dun; CHEN Wei-zhong; TIAN Hong-ming; CAO Jun-jie; GENG Ya-mei; CHEN Pei-shuai

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Stability analysis of large shield working well considering effect of diaphragm wall joint

更新时间：2026-06-25

- Stability analysis of large shield working well considering effect of diaphragm wall joint
- Vol. 32, Issue 10, (2011)
- 作者机构：
  
  1. 中交第二公路勘察设计研究院有限公司,武汉,430056
  2. 中国科学院武汉岩土力学研究所岩土力学与工程国家重点实验室,武汉,430071
  3. 山东大学岩土与结构工程研究中心济南,250061
- 作者简介：
- 基金信息：
- DOI：
  CLC： U456
- Online First：13 October 2011，
  
  Published：2011
- 稿件说明：
移动端阅览
CHU Yi-dun, CHEN Wei-zhong, TIAN Hong-ming, et al. Stability analysis of large shield working well considering effect of diaphragm wall joint[J]. 2011, 32(10).
DOI：

CHU Yi-dun, CHEN Wei-zhong, TIAN Hong-ming, et al. Stability analysis of large shield working well considering effect of diaphragm wall joint[J]. 2011, 32(10). DOI：

摘要

基于地下连续墙分幅施工的工程实际状况，建立了连续墙不抗弯不抗剪柔性接头、抗剪不抗弯半刚性接头以及抗剪又抗弯刚性接头的力学模型。结合南京纬三路过江隧道盾构工作井地下连续墙的设计，通过数值模拟，研究了连续墙接头型式对于墙体水平位移以及支护体系受力的影响规律。研究成果表明，在做好连续墙接头防渗的前提下，采用柔性接头时墙体的水平位移较大，支护体系内力明显增高；采用半刚性接头时既可以有效地限制墙体的水平位移，又可以将墙体承担的土压力分担到临时支撑和环梁之上，降低连续墙墙体的内力；采用刚性接头时可以降低临时支撑、环梁以及内衬的内力，但连续墙墙体要能承担极大的竖向弯矩和数值相当的横向弯矩。综合考虑建议工作井采用抗剪不抗弯的半刚性接头。

Abstract

Three mechanical models of diaphragm wall joint

i. e. flexible joint without resistance to shearing and bending

relative rigid joint with resistance to shearing and absolute rigid joint with resistance to shearing and bending

are established based on different effects of transverse stress transferring. In order to choose a reasonable joint for shield working well of Nanjing Weisan-road Yangtze River tunnel

the deformation and mechanical properties of diaphragm wall are analyzed by using above models. The results show that: flexible joint is easy to cause the increase in displacement of diaphragm wall and soil; and finally

leads to increase internal force of supports. Relative rigid joint are able to not only resist the displacement of diaphragm wall

but also decrease stress of diaphragm wall by transferring the stress to the temporary supports and ring beams; Absolute rigid joint may result in diaphragm wall undertake significant transverse and longitudinal moment. By comprehensive consideration

the relative rigid joint is chosen for the working well.

关键词

Keywords

references

Views

1780

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical simulation of stress redistribution during diaphragm wall construction

Coupling mechanism of seepage and heat transfer in rock fracture based on physics-informed neural networks

Influence of construction gap on the force of steel lining in compressed air storage cavern

Stability and failure mode analysis of tunnel face in composite ground with upper sand and lower clay layers

Characterization method for the three-dimensional soil cutting failure surface based on damage energy dissipation

Related Author

XIA Yuan-you

PEI Yao-yao

WANG Zhen

CHEN Shao-yan

CHEN Chen

WANG Zhi-liang1

XIAO Zhi-huan1

SHEN Lin-fang1

Related Institution

School of Civil Engineering and Architecture, Wuhan University of Technology

The third Bureau of China State Construction Engineering Corporation

Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology

State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences

School of Mechanics and Civil Engineering, China University of Mining and Technology

AI问答

⁰