Experimental study of assembly foundation for transmission line tower in Taklimakan desert

QIAN Zeng-zhen; LU Xian-long; DING Shi-jun

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Experimental study of assembly foundation for transmission line tower in Taklimakan desert

更新时间：2026-06-25

- Experimental study of assembly foundation for transmission line tower in Taklimakan desert
- Vol. 32, Issue 8, (2011)
- 作者机构：
  
  1. 中国地质大学（北京）工程技术学院,北京,100083
  2. 中国电力科学研究院输变电工程力学研究所,北京,100192
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU476+9
- Online First：16 August 2011，
  
  Published：2011
- 稿件说明：
移动端阅览
QIAN Zeng-zhen, LU Xian-long, DING Shi-jun. Experimental study of assembly foundation for transmission line tower in Taklimakan desert[J]. 2011, 32(8).
DOI：

QIAN Zeng-zhen, LU Xian-long, DING Shi-jun. Experimental study of assembly foundation for transmission line tower in Taklimakan desert[J]. 2011, 32(8). DOI：

摘要

为研究新疆塔克拉玛干沙漠地区输电线路工程中的组合装配式杆塔基础承载特性，开展了2种尺寸规格共4个基础在上拔与水平力组合作用下的现场试验，得到了基础顶部和基础底板的荷载-位移曲线、基础底板土压力变化规律。结果表明：上拔与水平力组合作用下，基础顶部上拔荷载-位移曲线为缓变型、水平荷载-位移曲线近似为直线；由混凝土底板和角钢支架所构成的组合装配式基础因自重轻、基础底板上覆沙体结构松散，使得基础的抗倾覆承载能力低。由混凝土底板和角钢支架组成的装配式基础各部件具有良好的协同工作性能，但水平荷载对装配式基础的承载性能影响大。根据基础上拔极限承载力试验值，采用柱式破裂面力学计算模型得到风加沙柱面平均摩擦阻力为2.6 kPa

Abstract

In order to obtain the performance of assembly foundations composed by the concrete footing slab and steel angle column

which are used for the transmission line engineering in Taklimakan desert

the four in-site full-scale of two sizes tests on the bearing capacity of assembly foundations combined uplift with horizontal loadings are carried out. The curves of load-displacement both of footing slab and foundation top plane

and the soil pressure on the footing slab are all obtained. For the foundation top plane

combined the uplift with horizontal loadings

the curve of uplift loading-displacement develops slowly; and the curve of horizontal loading-displacement increases linearly. The anti-overturning bearing capacity of assembly foundation is weak because of light dead weight of the steel support frame and the loose property of aeolian sand. The assembly foundation composed by concrete footing slab and steel angle column has a good property of coordinated performance. Influence of horizontal loading on bearing capacity of assembly foundation is obvious. According to the test data of ultimate uplift bearing capacity

the average frictional resistance of aeolian sand is 2.6 kPa

which is calculated by mechanical model of prismatic fracture plane.

关键词

Keywords

references

Views

2442

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Prototype tests of assembly foundation of transmission line in aeolian sand area

Research on dynamic compaction characteristics of aeolian sand in desert region of Keerqin

Full-scale tests on pad and chimney foundation subject to uplift combined with horizontal loads in aeolian sand

Full-scale tests of steel grillage foundation in aeolian sand areas

Experimental study on the uplift behavior and soil deformation characteristics of the double-blade screw anchor in loose sand

Related Author

DING Shi-jun

CHENG Yong-feng

LIU Run-xing

WANG Zhi-yuan

ZHANG Hong

DING Shi-jun

LU Xian-long

QIAN Zeng-zhen

Related Institution

Collge of Transportation, Inner Mongolia University

Beijing Electric Power Construction Research Institute of SGCC

Zhongnan Electric Power Design Institute Co., Ltd., China Power Engineering Consulting Group

State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences

College of Ocean Science and Engineering, Shanghai Maritime University

AI问答

⁰