Nonlinear finite element analysis of slope stability

TAN Xiao-hui; WANG Jian-guo; WANG Yin

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Nonlinear finite element analysis of slope stability

更新时间：2026-06-25

- Nonlinear finite element analysis of slope stability
- Vol. 29, Issue 8, (2008)
- 作者机构：
  
  1. 合肥工业大学资源与环境工程学院,合肥,230009
  2. 合肥工业大学土建工程学院,合肥,230009
  3. 同济大学地下建筑与工程学院,上海,200433
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU432
- Online First：02 August 2013，
  
  Published：2008
- 稿件说明：
移动端阅览
TAN Xiao-hui, WANG Jian-guo, WANG Yin. Nonlinear finite element analysis of slope stability[J]. 2008, 29(8).
DOI：

TAN Xiao-hui, WANG Jian-guo, WANG Yin. Nonlinear finite element analysis of slope stability[J]. 2008, 29(8). DOI：

摘要

基于有限元强度折减法，进行了边坡的弹塑性材料非线性及大变形几何非线性分析，并考虑了边坡的三维变形情况。在有限元分析中采用的是莫尔-库仑理想弹塑性模型，大变形分析采用的是更新的拉格朗日法。均质边坡的算例分析表明，有限元法与简化的毕肖普法的安全系数计算结果具有相同的规律，即安全系数都随着黏聚力及内摩擦角的增加而增加，随着重度的增加而减小，但是，各种有限元法的计算结果都比相应的毕肖普法的解要大，亦即毕肖普法偏于安全。各种方法对应的安全系数由大到小的顺序依次是：三维小变形有限元分析、二维大变形有限元分析、二维小变形有限元分析，简化的毕肖普法，前二者能更好地反映实际的边坡变形情况，二者的安全系数值也十分接近，因而是较好的方法。

Abstract

Based on the strength reduction method of finite element method

the elastoplastic material nonlinearity and large deformation geometrical nonlinearity of the slope are studied; and three dimensional deformation features of the slope are also considered. In the finite element analysis

the realistic elastoplastic model of Mohr-Coulomb is adopted; and the method for describing the large deformation characteristic of the soil is updated Lagrangian method. Through analyzing a homogeneous slope

it’s concluded that there exists the same rule among the results of the finite elements and simplified Bishop method. The rule is that the factor of safety will become large if the cohesion and the internal friction angle become large

and it will become small with the increase of unit weight. However

the results of the finite element methods are always larger than the corresponding value of the simplified Bishop method

which means that the result of simplified Bishop method is inclined to conservative. The decreasing order of the four kinds of results of safety factor is Fs (three dimensional small deformation)

Fs (two dimensional large deformation)

Fs (two dimensional small deformation) and Fs (simply Bishop Method); among them the first two methods are the best one and their values are very close each other.

关键词

Keywords

references

Views

1251

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Reliability analysis of landslide-thrust and internal forces of anti-slide pile based on strength reduction finite element method

Critical slip field of slope in process of rainfall infiltration

Reliability analysis of slope dynamic stability based on strength reduction FEM

Effect of element order on strength reduction finite element method

Reliability analysis of slope using non-intrusive stochastic finite element method

Related Author

WU Ying-xiang

LIU Dong-sheng

SONG Qiang-hui

OU Yi-hong

SHEN Yin-bin

ZHU Da-yong

JIANG Ze-feng

YAO Ha-yan

Related Institution

Department of Architecture & Civil Engineering, Logistical Engineering University

Chongqing Key Laboratory of Geomechanics & Geoenvironmental Protection, Logistical Engineering University

Chongqing Bureau of Geology and Minerals Exploration

Key Laboratory of Mechanics on Disaster and Environment in Western China of Ministry of Education, Lanzhou University

School of Civil and Hydraulic Engineering, Hefei University of Technology,,.

AI问答

⁰