Design and experimentation of high-pressure water jet set applied to incising coal seam in boreholes

TANG Jian-xin; JIA Jiang-qing; HU Guo-zhong; WANG Hong-tu; LI Xiao-hong; HU Guang-lin

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Design and experimentation of high-pressure water jet set applied to incising coal seam in boreholes

更新时间：2026-06-25

- Design and experimentation of high-pressure water jet set applied to incising coal seam in boreholes
- Vol. 28, Issue 7, (2007)
- 作者机构：
  
  1. 重庆大学西南资源开发及环境灾害控制工程教育部重点实验室,重庆,400044
  2. 兰州交通大学交通运输学院,兰州,730070
- 作者简介：
- 基金信息：
- DOI：
  CLC： TD712+.6
- Online First：13 September 2013，
  
  Published：2007
- 稿件说明：
移动端阅览
TANG Jian-xin, JIA Jiang-qing, HU Guo-zhong, et al. Design and experimentation of high-pressure water jet set applied to incising coal seam in boreholes[J]. 2007, 28(7).
DOI：

TANG Jian-xin, JIA Jiang-qing, HU Guo-zhong, et al. Design and experimentation of high-pressure water jet set applied to incising coal seam in boreholes[J]. 2007, 28(7). DOI：

摘要

本文针对矿井煤层瓦斯抽放及防突中煤层透气性差，瓦斯抽放率低等问题，按照高压水射流技术应用的原理，设计了应用于抽放钻孔中切割煤体的高压水射击流装置，并在现场对喷嘴和射流器进行了试验。试验结果表明，水射流方向采用+100，喷嘴直径为1.5mm，切割速度为0.2m/min，泵压为30MPa时，水射流切割钻孔中煤体效果最佳；煤层采用高压水射流切割缝后，钻孔预抽瓦斯的抽放率提高了18.8%，抽放时间相对缩短90%以上。因此，该项技术对于煤层瓦斯抽放和防治煤与瓦斯突出具有重要作用。

Abstract

In allusion to the problems of the low gas-penetration and low ratio of gas drainage during draining gas and prevention outburst

it is designed the high-pressure water jet installation of cutting coal which is installed in the draining bore

and tested the nozzle and the ejector in scene. The result showed that the effect of the coal cut by high-pressure water jet is the best when the angle of water jet is +100

the diameter of nozzle is 1.5mm

the cutting speed is 0.2m/min and the pressure of the pump is 30MPa; it is showed that the draining ratio is raised about 18.8% and the draining time is shorten over 90% when the coal is cut by the high-pressure water jet

too. Therefore

the technology is very important to the draining gas and preventing outburst.

关键词

Keywords

references

Views

1491

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Hydraulic scouring resistance characteristics of geosynthetics reinforced slopes

Physical-mechanical properties and durability analysis of foamed lightweight soil based on excavated soil and fly ash

Investigation on thickness selection method of sealing steel plate for CAES gas storage caverns

Nonlinear mechanical response of surrounding rock in compressed air energy storage cavern based on Hoek-Brown criterion

Evaluation of liquefaction flow characteristics and soil state of saturated sand based on tension and compression apparent viscosity

Related Author

No data

Related Institution

No data

AI问答

⁰