Shear beam model for interface failure was used for analyzing the fault rockburst occurrence. To analyze fault rockburst without considering the elasticity of the fault
the law of shear beam displacement and stress distributions
tearing crack length and critical load when fault rockburst occurred were obtained. The relation among tearing crack length
critical load and various kinds of mechanical parameters was analyzed. The results obtained show that if mining depth is large
and if the shear elastic modulus of the shear beam is low and thickness of the shear beam is large
and if shear softening ratio of faulted zone is large and thickness
coefficient of sliding friction
shear stress peak strength of faulted zone is low
then fault rockburst is easy to occur. These parameters of mining depth and the shear elastic modulus of the shear beam and shear softening ratio
shear stress peak strength
thickness of faulted zone have a more large influence on the fault rockburst occurrence. The theoretical foundation for fault rockburst prediction and prevention was proposed.
Occurrence mechanism of ultra-low friction-typed rockburst based on energy criterion
Stability analysis of submarine slopes with asymmetric shear band propagation
Research on formation mechanism and stability of tensile cracking-sliding loess collapse
Study of precursor information recognition and multiparameter early warning before rockburst of island fully mechanized caving face
Determination of engineering parameters based on mutable characteristics of monitored values in numerical simulation
Related Author
HU Xue-jin
LI Li-ping
CHEN Shuai
PAN Yi-shan
WU Guang-yao
ZHU Zhi-peng
WANG Dong
YE Wan-jun
Related Institution
School of Mechanics and Engineering, Liaoning Technical University
Institute of Disaster Rock Mechanics, Liaoning University
Shandong Engineering Research Center of Marine Exploration and Conservation, Ocean University of China
College of Architecture and Civil Engineering, Xi'an University of Science & Technology
State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology