3D elastoplastic finite element simulation on excavation and reinforcement of the diversion tunnel outlet slope at the left bank of Jinping-I Hydropower Project

CHEN Yi-feng; ZHOU Chuang-bing; YU Zhi-xiong; ZHANG Wen-jie; JIANG Qing-hui

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

3D elastoplastic finite element simulation on excavation and reinforcement of the diversion tunnel outlet slope at the left bank of Jinping-I Hydropower Project

更新时间：2026-06-25

- 3D elastoplastic finite element simulation on excavation and reinforcement of the diversion tunnel outlet slope at the left bank of Jinping-I Hydropower Project
- Vol. 28, Issue 8, (2007)
- 作者机构：
  
  水资源与水电工程科学国家重点实验室武汉大学,武汉,430072
- 作者简介：
- 基金信息：
- DOI：
  CLC： TU472
- Online First：15 October 2013，
  
  Published：2007
- 稿件说明：
移动端阅览
CHEN Yi-feng, ZHOU Chuang-bing, YU Zhi-xiong, et al. 3D elastoplastic finite element simulation on excavation and reinforcement of the diversion tunnel outlet slope at the left bank of Jinping-I Hydropower Project[J]. 2007, 28(8).
DOI：

CHEN Yi-feng, ZHOU Chuang-bing, YU Zhi-xiong, et al. 3D elastoplastic finite element simulation on excavation and reinforcement of the diversion tunnel outlet slope at the left bank of Jinping-I Hydropower Project[J]. 2007, 28(8). DOI：

摘要

锦屏一级水电站左岸导流洞出口边坡岸坡陡峻，层间挤压破碎带、顺坡卸荷裂隙及深部裂缝发育。边坡开挖将切除部分维持边坡稳定的坡脚岩体，从而对工程边坡及上部变形拉裂岩体的稳定性产生不利影响。基于锚固岩体弹塑性等效本构关系，采用弹塑性有限元法对边坡开挖、加固及地震作用进行了数值模拟，分析了开挖边坡的稳定性，并对初拟的“先锚后挖、边挖边锚”的施工程序的合理性进行了评价，提出了若干对工程建设具有一定指导意义的建议。

Abstract

The diversion tunnel outlet slope at the left bank of the Jinping-I Hydropower Project is naturally steep

with deep fractures

compressive fracture zones between layered strata

and release fractures oriented parallel to slope surface heavily developed. After excavation of the rock mass near the slope toe that maintains the stability of the slope

negative effects will occur on the stability of the cut slope and the upper rock mass developed with deep fractures. Based on an elastoplastic constitutive model of rock mass reinforced with rock bolts and cables

numerical simulations are performed by elastoplastic FEM to evaluate the stability of the slope during slope excavation

reinforcement and under seismic loading

and to evaluate the effectiveness of a suggested construction procedure of “anchoring before excavation and anchoring immediately after excavation”. Finally

several suggestions that may be helpful to construction of the slope

are presented.

关键词

Keywords

references

Views

1515

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Finite element simulation of excavation and support of abutment slope at Dagangshan Hydropower Project

Analysis of stress path and deformation-failure mechanism of high cutting loess slope

Influence of excavation unloading on vertical bearing behavior of existing pile groups

Measurement and analysis of impact of foundation pit excavation on below existed shield tunnels

Study of testing of end-bearing piles and reinforcement technology in mountain and karst area

Related Author

QI Zu-fang

TANG Zhong-min

JIANG Qing-hui

WEI Wei

PAN Shao-hua

HOU Xiao-kun

LI Tong-lu

LI Ping

Related Institution

State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University

Chengdu Hydroelectric Investigation and Design Institute, China Hydropower Consulting Group

School of Geological Engineering and Surveying, Chang’an University

Key Laboratory for Geo-hazards in Loess Area of Ministry of Land and Resources, Xi’an Center of Geological Survey, China Geological Survey

Research Center of Coastal and Urban Geotechnical Engineering, Zhejiang University

AI问答

⁰