Research on factors influencing HDPE-sand interface frictional properties by tilting table tests
|更新时间:2026-06-25
|
Research on factors influencing HDPE-sand interface frictional properties by tilting table tests
Vol. 27, Issue 12, (2006)
作者机构:
1. 同济大学 岩土工程重点实验室,上海,200092
2. 同济大学 土木工程学院地下建筑与工程系,上海,200092
作者简介:
基金信息:
DOI:
CLC:TU411.99
Online First:09 December 2013,
Published:2006
稿件说明:
移动端阅览
LI Zhi-bin, XU Chao, YE Guan-bao, et al. Research on factors influencing HDPE-sand interface frictional properties by tilting table tests[J]. 2006, 27(12).
DOI:
LI Zhi-bin, XU Chao, YE Guan-bao, et al. Research on factors influencing HDPE-sand interface frictional properties by tilting table tests[J]. 2006, 27(12).DOI:
Research on factors influencing HDPE-sand interface frictional properties by tilting table tests
Frictional parameters of HDPE-sand interface are measured using tilting table device. In order to analyze the factors influencing frictional properties
three kinds of HDPE with different asperities and three kinds of sands with different states are used in the experiments. Tilting table tests are conducted under a normal stress range of 1.0–9.0 kPa to simulate frictional characteristics under low stresses. It is found from the results that the interface dimensions
asperity of HDPE
the state of sand have effects on the frictional properties. Test results indicate that: (1) the larger the interface
the bigger the frictional angle is; (2) the rougher the HDPE surface
the bigger the frictional angle is; (3) frictional angle of wet sand and HDPE interface is bigger than that of dry sand; (4) frictional angle of loose sand and HDPE interface is smaller than that of dense sand.