惠秋芳. Application of Welding Procedure Technology of Low Alloy Steel S355J2G3[J]. 2014, (4): 90-92.DOI:
Application of Welding Procedure Technology of Low Alloy Steel S355J2G3
摘要
在分析对16 mm厚低合金钢板S355J2G3采用混合气体保护焊焊接工艺及焊接接头性能研究的基础上
通过焊接工艺评定
最终得到性能优异的焊接接头。结合生产实际情况
合理的焊接工艺规程
并将焊接工艺应用于大型换流变压器油箱的组焊中
在保证焊接结构具有较好强度的同时
提高了换流变压器油箱的使用寿命。
Abstract
The welding of 16 mm thick S355J2G3 low alloy steel plate is analyzed in terms of the proper mix gas arc welding procedure and the corresponding welding joint performances
and the it proves high quality welding joint based on the welding procedure qualification test. According to practical production
the reasonable welding procedure is made and applied to the tank welding of large converter transformer
which extends the lifetime of converter transformer tank with high strength welding structure.
Practical Application of Dust Pollution Monitoring and Intelligent Soot Blowing System on Heating Surface of 660 MW Boiler
Application of Comprehensive Analysis and Evaluation Method in Treatment of Volatile Organic Compounds——Take an Industrial Park in Jiangxi Province as an Example
Application of Electric Integrated Automation System in Power Plant
Research and Application of Tibet(High Atitude) PV Power Station
Application of Circulating Fluidized Bed Boiler in Agricultural and Forestry Biomass Power Generation Project