TEST STUDY ON USING POLYASPARTIC ACID AS SCALE AND CORROSION INHIBITORS FOR THE CIRCULATORY COOLING WATER
|更新时间:2025-09-28
|
TEST STUDY ON USING POLYASPARTIC ACID AS SCALE AND CORROSION INHIBITORS FOR THE CIRCULATORY COOLING WATER
Thermal Power GenerationVol. 38, Issue 7, Pages: 40-43(2009)
作者机构:
华北电力大学环境科学与工程学院
作者简介:
基金信息:
DOI:
CLC:TQ085.4
Published:2009
稿件说明:
移动端阅览
CHEN Ying-min, CUI LiCollege of Environmental Science and Engineeing. TEST STUDY ON USING POLYASPARTIC ACID AS SCALE AND CORROSION INHIBITORS FOR THE CIRCULATORY COOLING WATER[J]. Thermal power generation, 2009, 38(7): 40-43.
DOI:
CHEN Ying-min, CUI LiCollege of Environmental Science and Engineeing. TEST STUDY ON USING POLYASPARTIC ACID AS SCALE AND CORROSION INHIBITORS FOR THE CIRCULATORY COOLING WATER[J]. Thermal power generation, 2009, 38(7): 40-43.DOI:
TEST STUDY ON USING POLYASPARTIC ACID AS SCALE AND CORROSION INHIBITORS FOR THE CIRCULATORY COOLING WATER
Directing against the water quality of circulatory cooling water used in the thermal power plants
the scale-retarding performance and the corrosion-inhibiting performance for copper materials(HSn-70A) in the condenser using polyaspartic(PASP) acid have been studied.The test reuslts show that the PASP acid has good effect on scale-retardation but used amount of single PASP acid for corrosion inhibition being large.For this reason
a combination of four medicals has been studied to find out the optimal proportioning ratio and the synergistic effect.The optimal proportioning ratio of combination from four medicals is as follows:10 mg/L PASP acid + 0.5 mg/L BTA + 20 mg/L sodium molybdate+10 mg/L sodium gluconate.After application
the corrsion rate of HSn-70A copper is only 0.000 4 mm/a