INFLUENCE OF SECONDARY AIR STRAIGHT FLOW VELOCITY IN THE SWIRL BURNER UPON FORMATION OF NOx
|更新时间:2025-09-28
|
INFLUENCE OF SECONDARY AIR STRAIGHT FLOW VELOCITY IN THE SWIRL BURNER UPON FORMATION OF NOx
Thermal Power GenerationVol. 39, Issue 3, Pages: 23-29(2010)
作者机构:
1. 浙江大学热能工程研究所
2. 浙江大学热能工程研究所
作者简介:
基金信息:
DOI:
CLC:TK223.23
Published:2010
稿件说明:
移动端阅览
ZHOU Zhi-jun, ZHOU Cong-cong, SHAO Jie, et al. INFLUENCE OF SECONDARY AIR STRAIGHT FLOW VELOCITY IN THE SWIRL BURNER UPON FORMATION OF NOx[J]. Thermal power generation, 2010, 39(3): 23-29.
DOI:
ZHOU Zhi-jun, ZHOU Cong-cong, SHAO Jie, et al. INFLUENCE OF SECONDARY AIR STRAIGHT FLOW VELOCITY IN THE SWIRL BURNER UPON FORMATION OF NOx[J]. Thermal power generation, 2010, 39(3): 23-29.DOI:
INFLUENCE OF SECONDARY AIR STRAIGHT FLOW VELOCITY IN THE SWIRL BURNER UPON FORMATION OF NOx
The cold-state dynamic field of a new-type low NOx swirl burner has been obtained through combination of FLUENT cold-state simulation with cold-state test.After analysis of axial velocity
air flow range
reverse flow area
and jet flow boundary etc.
the results obtained are as follows:under condition of the secondary air straight flow velocity v=20 m/s
the attenuation of axial velocity is gentle
and the jet range being the longest
the area of reverse flow being the largest
the length of reverse flow being the longest and narrowest
but the expansion angle is comparatively small
the flame isn't easily to stick onto the wall
and slagging isn't easily to occur.At the same time
the empirical formulae for attenuation of axial velocity and for boundary of jet flow in the new type low NOx swirl burner have been given.