STUDY ON PERFORMANCE TEST OF NEW FLOCCULATION REACTOR PROCESS
|更新时间:2025-09-28
|
STUDY ON PERFORMANCE TEST OF NEW FLOCCULATION REACTOR PROCESS
Thermal Power GenerationVol. 39, Issue 5, Pages: 105-107(2010)
作者机构:
1. 西安热工研究院有限公司
2. 武汉大学化学与分子科学学院
作者简介:
基金信息:
DOI:
CLC:TM621
Published:2010
稿件说明:
移动端阅览
MAO Jin1, WANG Jing1, ZHANG Jiangtao1, et al. STUDY ON PERFORMANCE TEST OF NEW FLOCCULATION REACTOR PROCESS[J]. Thermal power generation, 2010, 39(5): 105-107.
DOI:
MAO Jin1, WANG Jing1, ZHANG Jiangtao1, et al. STUDY ON PERFORMANCE TEST OF NEW FLOCCULATION REACTOR PROCESS[J]. Thermal power generation, 2010, 39(5): 105-107.DOI:
STUDY ON PERFORMANCE TEST OF NEW FLOCCULATION REACTOR PROCESS
摘要
根据微涡旋絮凝机理设计出新型絮凝反应器。通过与传统网格絮凝反应器的对比试验
对新型絮凝反应器的絮凝效果进行分析
以确定最佳的反应器结构。试验结果表明
在同等条件下
新型絮凝反应器絮凝效果优于网格反应器
其对悬浊液处理效果稳定
处理后出水静沉30min
上清液浊度均能达到3NTU以下。相对传统机械搅拌澄清工艺
新型絮凝反应器具有水力停留时间短、对流量变化适应性强、运行稳定等优点。
Abstract
Based on the micro-vortex flocculation mechanism
a new type flocculation reactor has been designed.Through comparative test with the traditinal mesh flocculation reactor
the flocculation effectiveness of said new type flocculation reactor has been analysed
so as to determine the optimal structure of the new flocculation reactor.Results of test show that the flocculation effectiveness of the new flocculation reactor is better than that of the mesh type reactor under same conditions
having more stable treatment effectiveness for the suspensoid.After 30 min precipitation of the effluent water after treatment
the turbidity of teh supernatant is all below 3 NTU.Compared with the traditional mechanical agitation process
the new reactor has shorter hydraulic retention time
boasting better adaptability to the flow rate changes