Thermal Power GenerationVol. 39, Issue 3, Pages: 82-84(2010)
作者机构:
1. 西安热工研究院有限公司
2. 陕西渭河发电有限公司
作者简介:
基金信息:
DOI:
CLC:TM311
Published:2010
稿件说明:
移动端阅览
HE Guo-an1, WANG Xin-jie21.Xi'an Thermal Power Research Institue Co Ltd. VIBRATION DISPOSAL OF 2×600 MW AIR-COOLED UNITS[J]. Thermal power generation, 2010, 39(3): 82-84.
DOI:
HE Guo-an1, WANG Xin-jie21.Xi'an Thermal Power Research Institue Co Ltd. VIBRATION DISPOSAL OF 2×600 MW AIR-COOLED UNITS[J]. Thermal power generation, 2010, 39(3): 82-84.DOI:
VIBRATION DISPOSAL OF 2×600 MW AIR-COOLED UNITS
摘要
某电厂两台600 MW空冷机组在起动过程中均发生了多次动静碰磨
通过检修和磨合消除了该摩擦振动。同时
在带负荷过程中
这两台机组的7号轴承处轴振动(7号轴振)均随负荷变化而大幅波动
采用现场动平衡技术对低压转子-发电机转子联轴器对轮(低-发对轮)、低压2转子同时加重
处理后机组振动可控制在优良水平。
Abstract
Impact-abrasion between moving and stationary parts in 2×600 MW air-cooled units of one power plant has frequently occurred in the start-up process
and the said impact-abration being eliminated through repair and runing-in measures.At the same time
during the process of taking load
the shaft vibration at bearing no.7 of the said two units had a substantial fluctuation with the load change.By using the dynamic balancing method in the field
the trial weights are simutanuously added onto coupling between LP rotor and generator
as well as onto two LP rotors
thereby
the vibration of units can be controlled to a satisfied level.