TEST STUDY ON INFLUENCE OF THE REVERSED TANGENTIAL ANGLE FOR SEPARATING OVER-FIRED AIR UPON THE AERODYNAMIC FIELD IN FURNACE
|更新时间:2025-09-28
|
TEST STUDY ON INFLUENCE OF THE REVERSED TANGENTIAL ANGLE FOR SEPARATING OVER-FIRED AIR UPON THE AERODYNAMIC FIELD IN FURNACE
Thermal Power GenerationVol. 39, Issue 5, Pages: 13-17(2010)
作者机构:
西安交通大学能源与动力工程学院
作者简介:
基金信息:
DOI:
CLC:TK221
Published:2010
稿件说明:
移动端阅览
QI Hongmei, HUI Shien, CUI Dawei College of Energy and Power Engineering. TEST STUDY ON INFLUENCE OF THE REVERSED TANGENTIAL ANGLE FOR SEPARATING OVER-FIRED AIR UPON THE AERODYNAMIC FIELD IN FURNACE[J]. Thermal power generation, 2010, 39(5): 13-17.
DOI:
QI Hongmei, HUI Shien, CUI Dawei College of Energy and Power Engineering. TEST STUDY ON INFLUENCE OF THE REVERSED TANGENTIAL ANGLE FOR SEPARATING OVER-FIRED AIR UPON THE AERODYNAMIC FIELD IN FURNACE[J]. Thermal power generation, 2010, 39(5): 13-17.DOI:
TEST STUDY ON INFLUENCE OF THE REVERSED TANGENTIAL ANGLE FOR SEPARATING OVER-FIRED AIR UPON THE AERODYNAMIC FIELD IN FURNACE
Through cold modelling test carried on boiler of a 600 MW unit adopting INCFS-Ⅲ combustion system
the vaiational regularity of the relative tangential circle diameter in the zone of separating over-fired air (SOFA)
(Dxd)SOFA
the flow rate moment of residual rotational momentum at furnace outlet Jout
the velocity deviation E
and the uneven coefficienty of velocity M2 due to effect of horizontal flue duct at furnace outlet along with the variation of reversed tangential angle under condition of SOFA ratio is 0.32
has been obtained.When the reversed tangential angle is in a range of 0°~15°
the rotation direction of main gas flow keeps unchanged;Jout
(Dxd)SOFA
E
and M2 decreases with increasing the revesed tangential angle
and being minimum at θ=15°;under condition of the reversed angle is greater than 15° but less than 20°
the rotation direction of rotational gas flow in upper space of the furnace is unstable;after the reversed tangential angle is equal to or greater than 20°
the rotational gas flow in upper space of the furnace will be stable