SLAGGING PREVENTION TECHNOLOGY FOR BURNING SHENHUA COAL IN TANGENTIAL FIRING BOILERS
|更新时间:2025-09-28
|
SLAGGING PREVENTION TECHNOLOGY FOR BURNING SHENHUA COAL IN TANGENTIAL FIRING BOILERS
Thermal Power GenerationVol. 40, Issue 2, Pages: 38-43(2011)
作者机构:
1. 神华集团有限责任公司
2. 神华国华电力分公司
3. 西安热工研究院有限公司
作者简介:
基金信息:
DOI:
CLC:TK228
Published:2011
稿件说明:
移动端阅览
WANG Pingang1, SONG Chang2, WANG Yueming31.Shenhua Group Corporation. SLAGGING PREVENTION TECHNOLOGY FOR BURNING SHENHUA COAL IN TANGENTIAL FIRING BOILERS[J]. Thermal power generation, 2011, 40(2): 38-43.
DOI:
WANG Pingang1, SONG Chang2, WANG Yueming31.Shenhua Group Corporation. SLAGGING PREVENTION TECHNOLOGY FOR BURNING SHENHUA COAL IN TANGENTIAL FIRING BOILERS[J]. Thermal power generation, 2011, 40(2): 38-43.DOI:
SLAGGING PREVENTION TECHNOLOGY FOR BURNING SHENHUA COAL IN TANGENTIAL FIRING BOILERS
摘要
神华烟煤是我国结渣最为严重的发电用煤之一。分析了采用四角切圆燃烧锅炉燃烧神华煤时应采取的防渣技术
并与国内外相应的燃烧低灰熔点烟煤时所采取的防结渣技术进行了比较。采用较低的炉膛容积热负荷
合理的掺烧
以及相应的运行措施如较低的一次风温、较高的风煤比、炉膛出口氧量控制在3%、煤粉细度R906%等
可有效避免燃用神华煤时锅炉出现结渣。在台山、定州等电厂的实际应用表明
这些技术比国外公司采取的防低灰熔点烟煤结渣的技术更为有效。
Abstract
Shenhua coal is one of the most severely slagging coal sorts in China.The slagging prevention technologies needed to adopt for burning Shenhua coal in the tangential firing boilers have been analysed
and a comparison with corresponding slagging prevention technologies for burning bituminous coal with low ash fusing point at home and abroad being carried out.Results of comparison show that the slagging phenominon in boilers burning Shenhua coal can be effectively avoided under condition of adopting low volumetric heat capacity in the furnace
suitable mixedly burning
as well as corresponding measures in operation
such as lower temperature of the primary air
higher ratio of air to coal
the oxygen content at furnace outlet to be controlled to 3%
and the fineness of pulverized coal controlled to R906% etc..The said measures are more effective than that adopted by companies at abroad for burning bituminous coal with low ash fusing point.