PREPARATION OF ELETROLYTE BASE-PLATE FOR MCFC AND AFFECTING FACTORS THEROF
|更新时间:2025-09-28
|
PREPARATION OF ELETROLYTE BASE-PLATE FOR MCFC AND AFFECTING FACTORS THEROF
Thermal Power GenerationVol. 40, Issue 11, Pages: 38-41(2011)
作者机构:
华能清洁能源技术研究院
作者简介:
基金信息:
DOI:
CLC:TM911.4
Published:2011
稿件说明:
移动端阅览
ZHANG Ruiyun, XU Shisen, CHENG Jian Huaneng Clean Energy Technology Research Institute. PREPARATION OF ELETROLYTE BASE-PLATE FOR MCFC AND AFFECTING FACTORS THEROF[J]. Thermal power generation, 2011, 40(11): 38-41.
DOI:
ZHANG Ruiyun, XU Shisen, CHENG Jian Huaneng Clean Energy Technology Research Institute. PREPARATION OF ELETROLYTE BASE-PLATE FOR MCFC AND AFFECTING FACTORS THEROF[J]. Thermal power generation, 2011, 40(11): 38-41.DOI:
PREPARATION OF ELETROLYTE BASE-PLATE FOR MCFC AND AFFECTING FACTORS THEROF
A new preparation method for electrolyte base-plate used for molten carbonate fuel cells(MCFC) has been presented.By using a highly dispersed Boehmite stone and LiOH
the submicrometric γ-LiAlO2 powder used for preparation of electrolyte base-plate is prepared.By adopting the prepared LiAlO2 power and a water-soluble binder
i.e.caboxy methyl cellulose(CMC)
ect.
the electrolyte base-plate used for manufacturing MCFC is prepared.The single cell of MCFC is assembled by fitting said base-plate with electrode and electrolyte salt trips
the maximum voltage of single cell reaches above 1.0 V
the maximum discharged current reaching 10 A.The aperture and porosity on the base-plate
the particle size of γ-LiAlO2 powder
and the influence of environment condition in flowing process of slurry upon the performance of base-plate have been analysed.Results show that the performance of base-plate prepared by using above-mentioned method is good
satisfying the requirements in application of MCFC.