SLAGGING ON 300 MW UNIT BOILERS:REASON ANALYSIS AND COUNTERMEASURES
|更新时间:2025-09-28
|
SLAGGING ON 300 MW UNIT BOILERS:REASON ANALYSIS AND COUNTERMEASURES
Thermal Power GenerationVol. 41, Issue 9, Pages: 120-121(2012)
作者机构:
1. 武汉锅炉股份有限公司
2. 大唐兰州西固热电有限责任公司
3. 大唐辽源发电厂
4. 甘肃电投金昌发电有限责任公司
作者简介:
基金信息:
DOI:
CLC:TK227
Published:2012
稿件说明:
移动端阅览
ZOU Xianhong1, LUO Qing1, CHEN Guangyuan2, et al. SLAGGING ON 300 MW UNIT BOILERS:REASON ANALYSIS AND COUNTERMEASURES[J]. Thermal power generation, 2012, 41(9): 120-121.
DOI:
ZOU Xianhong1, LUO Qing1, CHEN Guangyuan2, et al. SLAGGING ON 300 MW UNIT BOILERS:REASON ANALYSIS AND COUNTERMEASURES[J]. Thermal power generation, 2012, 41(9): 120-121.DOI:
SLAGGING ON 300 MW UNIT BOILERS:REASON ANALYSIS AND COUNTERMEASURES
Serious slagging occurred on three 300 MW unit boilers with low ash fusion point bituminous and lignite as the fuel.Six factors such as installation error of the burner
air leakage of the furnace
primary air speed imbalance under thermal state
unreasonable combustion air distribution and the bad fuel quality were considered as the main reason.Thus
several measures were proposed as following:improving the installation quality of boiler combustion equipment;carrying out the thermal state leveling test of primary air regularly;clearing the hanging slagging in furnace and the burner nozzle timely;considering blending coals with high ash melting point and similar quality when burning the coals with ash melting point that below 1 100 ℃;controlling the oxygen concentration at the outlet of furnace or economizer by adjusting the supply air volume.