DUCTILITY AND TOUGHNESS VARYING TENDENCY OF T91-STEEL AFTER LONG-TIME OPERATING AT HIGH TEMPERTURE
|更新时间:2025-09-28
|
DUCTILITY AND TOUGHNESS VARYING TENDENCY OF T91-STEEL AFTER LONG-TIME OPERATING AT HIGH TEMPERTURE
Thermal Power GenerationVol. 41, Issue 7, Pages: 62-65(2012)
作者机构:
1. 河北省电力科学研究院
2. 西安热工研究院有限公司
作者简介:
基金信息:
DOI:
CLC:TG142.1
Published:2012
稿件说明:
移动端阅览
ZHANG Xiaoyu1, OU YangJie1, KE Hao1, et al. DUCTILITY AND TOUGHNESS VARYING TENDENCY OF T91-STEEL AFTER LONG-TIME OPERATING AT HIGH TEMPERTURE[J]. Thermal power generation, 2012, 41(7): 62-65.
DOI:
ZHANG Xiaoyu1, OU YangJie1, KE Hao1, et al. DUCTILITY AND TOUGHNESS VARYING TENDENCY OF T91-STEEL AFTER LONG-TIME OPERATING AT HIGH TEMPERTURE[J]. Thermal power generation, 2012, 41(7): 62-65.DOI:
DUCTILITY AND TOUGHNESS VARYING TENDENCY OF T91-STEEL AFTER LONG-TIME OPERATING AT HIGH TEMPERTURE
T91 steel pipes were investigated by series impact tests of T91-steel-made high temperature reheater pipes which had been running for 130 000 hours
combined with test results of the original pipes and T91-steel samples which had 60 000 hours of operation.Results show that
with the increasing running time
fracture appearance transition temperatrue(FATT) of T91 steel rose obviously
this indicates that there is a decrease in ductility and toughness of material during the running.After long time(130 000 h) operation at high temperature
T91 steel presents 100% shear fracture on the impact fracture surface when the test temperature was above 0 ℃
and the ductile fracture dominates.During the crack propagation process
only stable crack growth occurs
this is consistent with the cleavage fracture rate of the fracture surface(which is 0).As the temperature of impact test rising
crack propagation energy Wp of all 3 samples increases
and the original pipe's is the maximum when its test temperature is the same as the other two.