Active disturbances rejection method based ball mill system control
|更新时间:2025-09-28
|
Active disturbances rejection method based ball mill system control
Thermal Power GenerationVol. 42, Issue 7, Pages: 83-87(2013)
作者机构:
1. 机械工业第三设计研究院
2. 重庆大学动力工程学院
作者简介:
基金信息:
DOI:
CLC:TP273
Published:2013
稿件说明:
移动端阅览
ZENG Jian1, CHEN Hong2 1.The Third Design and Research Institute of Ministry of Machinery Industry. Active disturbances rejection method based ball mill system control[J]. Thermal power generation, 2013, 42(7): 83-87.
DOI:
ZENG Jian1, CHEN Hong2 1.The Third Design and Research Institute of Ministry of Machinery Industry. Active disturbances rejection method based ball mill system control[J]. Thermal power generation, 2013, 42(7): 83-87.DOI:
Active disturbances rejection method based ball mill system control
摘要
针对钢球磨煤机(球磨机)制粉系统控制过程中存在的多变量、强耦合、非线性和时变性等特性
提出了自抗扰控制器(ADRC)解耦控制方案
将多变量球磨机制粉系统作为多个单变量回路系统
对每个单变量回路系统设计自抗扰控制器
建立ADRC球磨机制粉控制系统;将各变量间的耦合作为各单变量回路系统的外部扰动
由扩张状态观测器(ESO)进行估计
并在前馈通道中进行补偿
以对各耦合变量进行解耦。仿真试验结果表明
与常规球磨机PID解耦控制相比
球磨机自抗扰解耦控制系统具有适应性、抗扰性和解耦能力强的良好控制品质。
Abstract
Against such characteristics as multivariable
strong coupling
nonlinear and time varying that appeared during the ball mill control
the active disturbance rejection control(ADRC) scheme was proposed.The multivariable ball mill pulverizing system was regarded as multiple univariate loop systems
and for each loop system
the active disturbance rejection controller was designed
so the ball mill pulverizing ADRC system was established.The coupling of variables
regarded as the"external disturbance"of each loop system
was estimated by the extended state observer(ESO)
and then compensated in the feed-forward channel
so as to achieve the decoupling control of the ball mill pulverizing system.Compared with the conventional PID decoupling control system
the simulation experimental results showed that the ADRC based ball mill pulverizing control system had strong adaptability