Tin brass cooling plate tube leakage in a nuclear power plant:reason analysis and countermeasures

MAO Caiyun; Wu Junyi; HAN Yugang; ZHANG Xingtian China National Nuclear Power Operations Management Co.

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

Tin brass cooling plate tube leakage in a nuclear power plant:reason analysis and countermeasures

更新时间：2025-09-28

- Tin brass cooling plate tube leakage in a nuclear power plant:reason analysis and countermeasures
- Thermal Power Generation Vol. 42, Issue 5, Pages: 72-75(2013)
- 作者机构：
  
  中核核电运行管理有限公司二厂
- 作者简介：
- 基金信息：
- DOI：
  CLC： TM623
- Published：2013
- 稿件说明：
移动端阅览
MAO Caiyun, Wu Junyi, HAN Yugang, et al. Tin brass cooling plate tube leakage in a nuclear power plant:reason analysis and countermeasures[J]. Thermal power generation, 2013, 42(5): 72-75.
DOI：

MAO Caiyun, Wu Junyi, HAN Yugang, et al. Tin brass cooling plate tube leakage in a nuclear power plant:reason analysis and countermeasures[J]. Thermal power generation, 2013, 42(5): 72-75. DOI：

摘要

针对某核电厂核岛应急通风系统的锡黄铜冷却盘管发生的泄漏事故

对泄漏管样进行了宏观检查、材质、腐蚀产物、电化学、裂纹宏微观和断口SEM形貌等分析。结果表明

冷却介质中亚硝酸盐环境下锡黄铜发生的应力腐蚀开裂(SCC)是导致其冷却盘管泄漏的主要原因。一方面是因为亚硝酸盐生成的NH4+使锡黄铜管对SCC特别敏感

另一方面锡黄铜管内的残余应力加剧了管的应力腐蚀倾向。对此

提出了将破损冷却盘管更换为紫铜管

并将缓蚀剂中TTA的含量由1.0mg/kg提高到10～20mg/kg等改进措施。

Abstract

Leakage occurred on tin brass cooling plate tubes of emergency ventilation system in a nuclear power plant.Thus

several investigations were carried out

such as the macroscopic examination

broken tube material analysis

corrosion product analysis

electrochemical analysis

macro and micro analysis of crack and fracture

and the fracture SEM analysis.The results showed that

stress corrosion cracking(SCC) occurred on the tin brass in nitrite environment in the cooling medium was considered as the major reason.One of the reason is the NH4+ formed by nitrite made the tin brass tube particularly sensitive to the SCC.On the other hand

residual stress on the tin brass tube exacerbated the stress corrosion tendency.Several measurements were put forward

like replacing the broken cooling plate tubes for red copper tubes

increasing the TTA content in corrosion inhibitor from 1.0 mg/kg to 10-20 mg/kg

and so on.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

IMPROVEMENT OF LEAKAGE-PLUGGING TECHNOLOGY ON TUBE-PLATE OF HIGH-PRESSURE HEATER

Thermal fatigue failure analysis for drainage-tank in hot section of reheat pipeline in an ultra supercritical 1 000 MW unit

Investigation on residual stress in dissimilar steel weld for nuclear steam generators

Failure analysis and improvement for containment spray system valve's remote actuating mechanism in a nuclear power station

Function analysis for automatic depressurization system in AP1000 nuclear power plant

Related Author

LI Wenbin

HAO Xiaojun

FENG Yanting

LI Zhongwei

ZHENG Xiangfeng Hebei Electric Power Research Institute

LOU Yumin

PENG Yichao

TU Rongfeng

Related Institution

Hebei Electric Power Research Institute

Zhejiang Zhoushan Coal-based Power Co., Ltd.

Zhejiang Energy R&D Co., Ltd.

Tianjin Key Laboratory of Advanced Joining Technology

Shanghai Nuclear Engineering Research & Design Institute

AI问答

⁰