Control optimization of turbine oil motive with valve position feedback device under fault condition
|更新时间:2025-09-28
|
Control optimization of turbine oil motive with valve position feedback device under fault condition
Thermal Power GenerationVol. 42, Issue 12, Pages: 115-117(2013)
作者机构:
广东惠州平海发电厂有限公司
作者简介:
基金信息:
DOI:
CLC:TK267
Published:2013
稿件说明:
移动端阅览
WU Yi, LIN Lei, CHEN Xuelin, et al. Control optimization of turbine oil motive with valve position feedback device under fault condition[J]. Thermal power generation, 2013, 42(12): 115-117.
DOI:
WU Yi, LIN Lei, CHEN Xuelin, et al. Control optimization of turbine oil motive with valve position feedback device under fault condition[J]. Thermal power generation, 2013, 42(12): 115-117.DOI:
Control optimization of turbine oil motive with valve position feedback device under fault condition
In case of linear variable differential transducer(LVDT)of the servo valve position feedback device
the valve position is difficult to be fixed after the PID control is switched to manual control.According to control principle of the oil motive and combining with control characteristics of the oil motive servo valve
control model of the oil motive under fault condition of the valve position feedback device LVDT was established.Moreover
this control model was applied on ultra supercritical 1 000MW unit of Guangdong Huizhou Pinghai Power Plant to optimize its original oil motive control logic.The simulation results and actual experimental results indicate that
the optimized oil motive control logic can stabilize the valve position quickly under fault condition of the servo valve position feedback equipment LVDT.It can control the rotation speed within 300r/min once the fault occurred and 200r/min after the speed experienced three waveforms.