On-line corrosion monitoring technology of chemical cleaning for superheaters
|更新时间:2025-09-28
|
On-line corrosion monitoring technology of chemical cleaning for superheaters
Thermal Power GenerationVol. 42, Issue 12, Pages: 80-83(2013)
作者机构:
1. 神华国华(北京)电力研究院有限公司
2. 西安热工研究院有限公司
作者简介:
基金信息:
DOI:
CLC:TM621.8
Published:2013
稿件说明:
移动端阅览
ZHANG Guangwen, LIU Feng, NI Ruitao, et al. On-line corrosion monitoring technology of chemical cleaning for superheaters[J]. Thermal power generation, 2013, 42(12): 80-83.
DOI:
ZHANG Guangwen, LIU Feng, NI Ruitao, et al. On-line corrosion monitoring technology of chemical cleaning for superheaters[J]. Thermal power generation, 2013, 42(12): 80-83.DOI:
On-line corrosion monitoring technology of chemical cleaning for superheaters
摘要
根据过热器酸洗工程的特点
基于线性极化原理
开发出了腐蚀在线监测系统。该系统采用双电极体系
通过法兰接入系统
可在高温、高压的清洗介质中对线性极化电阻进行测量。选择T91钢作为试片材质
通过动态挂片试验验证腐蚀监测系统的可靠性。试验结果表明
腐蚀在线监测系统测得的试片腐蚀速率与通过挂片腐蚀失重法获得的腐蚀速率的误差率在±5%以内
说明该系统可准确监测出清洗过程中腐蚀监测试片的腐蚀情况。
Abstract
An on-line corrosion monitoring system was developed according to the actual characteristics of chemical cleaning and the principle of linear polarization.This system applies the twoelectrode system that connected to the system by flange
which can detect the linear polarization resistance in the cleaning medium with high temperature and high pressure.The T91steel was taken as the example to verify the reliability of the monitoring system through dynamic coupon test.The results show that
the corrosion rate detected by the on-ling monitoring system was close to that by the dynamic coupon test
with the error rate less than±10%
indicating the corrosion situation can be accurately detected by the above monitoring system during the acid cleaning process.