Performance optimization and maximum denitration efficiency analysis for SCR-DeNOx power plants
|更新时间:2025-09-28
|
Performance optimization and maximum denitration efficiency analysis for SCR-DeNOx power plants
Thermal Power GenerationVol. 43, Issue 7, Pages: 157-160(2014)
作者机构:
西安热工研究院有限公司苏州分公司
作者简介:
基金信息:
DOI:
CLC:X773
Published:2014
稿件说明:
移动端阅览
FANG Zhaojun, JIN Lipeng, SONG Yubao, et al. Performance optimization and maximum denitration efficiency analysis for SCR-DeNOx power plants[J]. Thermal power generation, 2014, 43(7): 157-160.
DOI:
FANG Zhaojun, JIN Lipeng, SONG Yubao, et al. Performance optimization and maximum denitration efficiency analysis for SCR-DeNOx power plants[J]. Thermal power generation, 2014, 43(7): 157-160.DOI:
Performance optimization and maximum denitration efficiency analysis for SCR-DeNOx power plants
Reason analysis for nonuniform ammonia spraying in SCR system of domestic power plants at present was carried out.By optimization and regulation for ammonia-injection-grid(AIG)of the SCR systems in two power units
the maximum denitration efficiency which can ensure the qualified ammonia escaping value was obtained.The experimental results show that:after the AIG was optimized
with the denitration efficiency of 50%
the relative standard deviation of NOxconcentration at outlet of side A and side B of the reactor decreased from 31.59% and 40.44% to 9.25% and 8.97%
respectively;with the denitration efficiency of 74.3%
the relative standard deviation of NOxconcentration at outlet of side A and side B of the reactor can still reach9.89% and 10.75%.Experiment about the maximum denitration efficiency was performed after the catalyst was put into service for 16 000hours.The results show that
under 600MW load condition
the maximum denitration efficiency dropped from 87% to 75%