Spectrum and shaft center orbit based fault feature extraction and diagnosis for steam turbines
|更新时间:2025-09-28
|
Spectrum and shaft center orbit based fault feature extraction and diagnosis for steam turbines
Thermal Power GenerationVol. 43, Issue 8, Pages: 140-142(2014)
作者机构:
河北工程大学水电学院
作者简介:
基金信息:
DOI:
CLC:TK268
Published:2014
稿件说明:
移动端阅览
GAO Junru, SUN Yajun, BAN Muyuan. Spectrum and shaft center orbit based fault feature extraction and diagnosis for steam turbines[J]. Thermal power generation, 2014, 43(8): 140-142.
DOI:
GAO Junru, SUN Yajun, BAN Muyuan. Spectrum and shaft center orbit based fault feature extraction and diagnosis for steam turbines[J]. Thermal power generation, 2014, 43(8): 140-142.DOI:
Spectrum and shaft center orbit based fault feature extraction and diagnosis for steam turbines
摘要
采用频谱及轴心轨迹图的方法提取仿真台得到的故障振动信号特征
分别建立子BP神经网络
并采用D-S证据理论对子BP神经网络的输出进行融合(多层信息融合)方法
从不同侧面对故障进行诊断。结果表明:采用多层信息融合方法的故障诊断置信度比频谱方法提高约0.03
比轴心轨迹图方法提高0.4
效果显著;对故障类型的识别准确率具有显著提高。
Abstract
The fault vibration signal feature obtained from the simulation platform was extracted by using the method of spectrum and shaft center orbit.Moreover
the BP sub neural network was established
and the D-S evidence theory was employed to fuse the output of each neural network and diagnose the faults from different aspects.The results indicate that
this multi-level information fusion method can identify the various typical faults effectively
of which the confidence was increased by 0.03 and 0.4
compared with the spectrum method and shaft center orbit method
respectively.Furthermore
the identification accuracy of this method was increased significantly.