MCP-CSH control of reheat steam temperature for supercritical power units

WU Sirun; YANG Ping

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

MCP-CSH control of reheat steam temperature for supercritical power units

更新时间：2025-09-28

- MCP-CSH control of reheat steam temperature for supercritical power units
- Thermal Power Generation Vol. 44, Issue 3, Pages: 63-68(2015)
- 作者机构：
  
  上海电力学院自动化工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC： TK223.7
- Published：2015
- 稿件说明：
移动端阅览
WU Sirun, YANG Ping. MCP-CSH control of reheat steam temperature for supercritical power units[J]. Thermal power generation, 2015, 44(3): 63-68.
DOI：

WU Sirun, YANG Ping. MCP-CSH control of reheat steam temperature for supercritical power units[J]. Thermal power generation, 2015, 44(3): 63-68. DOI：

摘要

针对超临界机组再热蒸汽温度采用传统PID控制难以达到较好控制品质的问题

将基于多容惯性标准传递函数方法设计的串联校正状态反馈协调型(MCP-CSH)控制器用于再热蒸汽温度控制。仿真结果为:设定值扰动时

控制系统响应无超调且调整时间短;燃料扰动时

控制系统响应的最大动态偏差仅为传统PID控制的50%;鲁棒性试验时

在过程惯性时间上浮32%或过程增益下降80%情况下控制系统仍然保持良好的控制品质。对比表明

新型控制器的再热蒸汽温度控制品质显著优于传统PID控制器。

Abstract

The conventional PID controller cannot obtain good control effects in reheat steam temperature for supercritical power units. Thus

the cascade compensation and state-variable feedback Harmony( CSH) controller was adopted to control the reheat steam temperature. The simulation experiments show that

during the setting value disturbance test

response of the new control system has no overshoot and the regulation time is short. During the fuel disturbance test

the maximum dynamic deviation of the new control system's response is only 50% of that of the conventional PID control system. During the robustness test

the new control system con still keep great control quality when the process inertia time increases by32% or the process gain decreases by 80%. Therefore

the new control system has a better control quality on reheat steam temperature than the conventional PID control system.

关键词

Keywords

references

Views

108

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Application of supervisory predictive control in reheat steam temperature control for double-reheat units

Identification of boiler reheat steam temperature model based on improved particle swarm optimization algorithm

Experimental study on optimization and adjustment of wall temperature of reheater tubes in an ultra supercritical double-reheat boiler

Thermoeconomic and techno-economic analysis on an ultra-supercritical unit with double-reheat cycle

Reheat steam temperature model identification of ultra supercritical unit with double reheat cycles

Related Author

XUN Qingqiu

GUO Yiwen

JIANG Yin

GENG Linxiao

WU Zhoujing

YANG Ping

CHEN Huanle

KANG Yingwei

Related Institution

Xi’an Thermal Power Research Institute Co., Ltd.

College of Automation Engineering, Shanghai University of Electric Power

Shanghai Minghua Electric Power Technology & Engineering Co., Ltd.

Xi’an Thermal Power Research Institute Co., Ltd., Suzhou Branch

State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University

AI问答

⁰