Transfer characteristics of heavy metals under biomass waste and plastics waste co-firing conditions
|更新时间:2025-09-28
|
Transfer characteristics of heavy metals under biomass waste and plastics waste co-firing conditions
Thermal Power GenerationVol. 44, Issue 3, Pages: 8-14(2015)
作者机构:
华南理工大学电力学院
作者简介:
基金信息:
DOI:
CLC:X705
Published:2015
稿件说明:
移动端阅览
XIE Mingchao, MA Xiaoqian, ZENG Guangbo. Transfer characteristics of heavy metals under biomass waste and plastics waste co-firing conditions[J]. Thermal power generation, 2015, 44(3): 8-14.
DOI:
XIE Mingchao, MA Xiaoqian, ZENG Guangbo. Transfer characteristics of heavy metals under biomass waste and plastics waste co-firing conditions[J]. Thermal power generation, 2015, 44(3): 8-14.DOI:
Transfer characteristics of heavy metals under biomass waste and plastics waste co-firing conditions
To study the weight loss rate and transfer behavior of heavy metals( Pb
Cu
Zn) under biomass wastes and plastic wastes co-firing conditions
experiments about seven components( wood
paper
rubber
recycled PE
recycled PP
recycled PS and recycled PVC) were conducted on a tube furnace and a atomic absorption spectrophotometer. The results show that
co-combustion of biomass and plastic wastes causes a decrease in weight loss rate of the samples
especially the paper. When the sample is burned alone
the volatilization rate of Pb can reach over 85%at 900 ℃
that of Cu in four plastic wastes can reach over 85% at 1 000 ℃
and that of Zn rises significantly at high temperatures. Pb can be captured in bottom ash when the paper is co-fired with the plastics except the PVC. Cu can be captured in bottom ash when the wood and paper are co-fired with the PVC and the rubber. Zn can be captured in bottom ash when the wood is co-fired with the plastics except the rubber or the paper with the PS.