Measurement of SO2 concentration in flue gas using ultraviolet LED
|更新时间:2025-09-28
|
Measurement of SO2 concentration in flue gas using ultraviolet LED
Thermal Power GenerationVol. 44, Issue 3, Pages: 48-52(2015)
作者机构:
燕山大学车辆与能源学院
作者简介:
基金信息:
DOI:
CLC:X831
Published:2015
稿件说明:
移动端阅览
WANG Huashan, LI Xujia, LI Nan. Measurement of SO2 concentration in flue gas using ultraviolet LED[J]. Thermal power generation, 2015, 44(3): 48-52.
DOI:
WANG Huashan, LI Xujia, LI Nan. Measurement of SO2 concentration in flue gas using ultraviolet LED[J]. Thermal power generation, 2015, 44(3): 48-52.DOI:
Measurement of SO2 concentration in flue gas using ultraviolet LED
摘要
采用LED作为探测光源
可以进一步降低SO2检测设备的成本
增加其使用寿命。以中心波长为300 nm的紫外LED为光源
基于SO2的吸收光谱特性
建立了光学吸收参量与SO2浓度之间的理论模型。试验表明
采用新的数据处理方法进行SO2气体浓度评价
可以显著降低光源及探测器电子噪声对测量结果的影响
当信噪比等于2时其检测限可达0.2μL/L
通过长时间的浓度测量验证了该检测方法的稳定性及精确性。
Abstract
On the basis of SO2 absorption spectroscopy
the monitoring technique for SO2 concentration around 300 nm using an ultraviolet light-emitting diode( LED) as the light source was developed. The theoretical relationship model between the SO2 concentrations and the optical parameters was established. The experimental results show that
using the novel data processing method to evaluate the SO2 concentration can reduce the influence of the detector electron noise and the light source on measurement significantly. The detection limit can reach 0. 2 μL / L when the signal noise ratio equals 2. Long-term detection of SO2 concentration was carried out to verify the stability and accuracy of this measurement technique. To sum up
using an ultraviolet light-emitting diode can reduce the cost and prolong the service life of sulfur dioxide monitoring.