Effect of material properties on particle deposition characteristics on heat transfer surfaces

TANG Chan; ZHANG Jingzhou

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

Effect of material properties on particle deposition characteristics on heat transfer surfaces

更新时间：2025-09-28

- Effect of material properties on particle deposition characteristics on heat transfer surfaces
- Thermal Power Generation Vol. 44, Issue 12, Pages: 80-86(2015)
- 作者机构：
  
  1. 南京航空航天大学能源与动力学院
  2. 南京工程学院能源与动力工程学院
  3. 南京航空航天大学江苏省航空动力系统重点实验室
- 作者简介：
- 基金信息：
- DOI：
  CLC： TK172
- Published：2015
- 稿件说明：
移动端阅览
TANG Chan, ZHANG Jingzhou. Effect of material properties on particle deposition characteristics on heat transfer surfaces[J]. Thermal power generation, 2015, 44(12): 80-86.
DOI：

TANG Chan, ZHANG Jingzhou. Effect of material properties on particle deposition characteristics on heat transfer surfaces[J]. Thermal power generation, 2015, 44(12): 80-86. DOI：

摘要

为了研究飞灰颗粒和管壁材料的物理性质对换热器壁面颗粒沉积特性的影响

采用欧拉-拉格朗日方法及EI-Batsh和Haselbacher提出的粒子沉积模型模拟稀疏气固两相流

进而分析飞灰颗粒横掠圆管束时受热表面的颗粒沉积分布。结果表明:杨氏模量对颗粒的沉积影响很大

粒径较大时

杨氏模量的增加颗粒在壁面沉积率降低

粒径较小时

杨氏模量对沉积的影响减弱;壁面材料杨氏模量的影响程度比颗粒杨氏模量稍弱;颗粒密度增大

沉积率降低。

Abstract

To investigate the effects of such parameters as physical properties of fly ash particle and heating surface

and particle velocity on wall capture and particle deposition in the heat exchangers

the Euler-Lagrangian method and the particle deposition model presented by EI-Batsh and Haselbacher were applied to simulate the dilute gas-solid two phase flow.The deposition distribution of ash particles flow crossing the heating tube bundles has been discussed.The results show that the Young's modulus has a great influence on the particle deposition.For the larger particle size

the Young's modulus is larger

deposition rate of particles on the wall is lower.For the smaller particle size

the effect of deposition of Young's modulus is weakened.The influence of the Young's modulus of surface material is a bit weaker than the Young's modulus of particles.As the particle density increases

the deposition rate decreases.

关键词

Keywords

references

Views

157

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

DIAGNOSIS FOR CAUSES OF FOULING FORMATION IN DIRECT DISCHARGING TYPE COOLING WATER SYSTEM

NUMERICAL ANALYSIS OF TURBULENT FLOW HEAT TRANSFER ON THE SHELL-SIDE OF SPIRALLY TWISTED FLAT-TUBE HEAT EXCHANGER

DESIGN RESEARCH AND PROJECT DEMONSTRATION OF THE FIRT HOME-MADE 210 MW CFB BOILER

INFLUENCE OF FOULING UPON EXERGY TRANSFER PERFORMANCE OF HEAT EXCHANGER

CAUSE ANALYSIS OF TUBE BREAKAGE IN HEAT EXCHANGER OF CLOSED-LOOP COOLING WATER AND RETROFIT THEREOF

Related Author

ZHOU XIaowei

JI Xiaohui

ZHOU Baiqing

SANG Zhi-fu(Nanjing Industrial University

WANG Hai-feng

ZHANG Xing-xiang

ZHANG Yan-jun

SUN Xian-bin

Related Institution

Nanyang Institute of Technology

Wuhan University

Nanjing University of Technology

Fenyi Power Generation Co., Ltd

China Power Investment Corporation

AI问答

⁰