Experimental study on SNCR process of the effect of CO additive on denitration performance
|更新时间:2025-09-28
|
Experimental study on SNCR process of the effect of CO additive on denitration performance
Thermal Power GenerationVol. 45, Issue 5, Pages: 41-47(2016)
作者机构:
1. 东南大学能源热转换及其过程测控教育部重点实验室
2. 东方电气集团东方锅炉股份有限公司
作者简介:
基金信息:
DOI:
CLC:X773
Published:2016
稿件说明:
移动端阅览
WANG Linwei, DUAN Yufeng, YAO Ting, et al. Experimental study on SNCR process of the effect of CO additive on denitration performance[J]. Thermal power generation, 2016, 45(5): 41-47.
DOI:
WANG Linwei, DUAN Yufeng, YAO Ting, et al. Experimental study on SNCR process of the effect of CO additive on denitration performance[J]. Thermal power generation, 2016, 45(5): 41-47.DOI:
Experimental study on SNCR process of the effect of CO additive on denitration performance
Experimental study on selective non-catalytic reduction(SNCR)process and the effect of adding CO on the denitration efficiency were performed on a tubular flow reactor in simulated flue gas atmosphere
at temperature ranging from 650 ℃to 950 ℃.The relative reaction mechanisms were investigated.The results show that
with no CO added
the optimum temperature for SNCR denitration was 900℃.With an increase in reaction temperature
the emission concentrations of both N_2O and NO_2 increased first and then decreased
which were similar to the denitration efficiency curves.At high temperature the ammonia escape reduced.At temperatures below 700℃
increasing the ammonia nitrogen mole ratio had no apparent effect on the denitration efficiency.While at temperatures higher than 800 ℃
with an increase in ammonia nitrogen mole ratio
the denitration efficiency and N_2OO emission concentration both increased
but the NO_2 emissions concentration decreased.With trace CO added
the optimum temperature for denitration and the curve of ammonia escape shifted to a lower temperature and the maximum denitration efficiency increased slightly.The temperature window of N_2O emission was broadened and its peak increased.The NO_2 emission concentration was close to zero.In addition
increasing the CO addition amount can lead to an increase in CO escape at low temperatures.Therefore
in practical application
trace amount of CO can be added to decrease the SNCR denitration temperature and reduce the NO_2 emission concentration and ammonia escape at low temperatures.