Engineering application of reheat steam temperature control mode for double-reheat tower boilers
|更新时间:2025-09-28
|
Engineering application of reheat steam temperature control mode for double-reheat tower boilers
Thermal Power GenerationVol. 45, Issue 8, Pages: 68-74(2016)
作者机构:
神华国华广投(北海)发电有限责任公司
作者简介:
基金信息:
DOI:
CLC:TM621.2
Published:2016
稿件说明:
移动端阅览
LI Chuansheng. Engineering application of reheat steam temperature control mode for double-reheat tower boilers[J]. Thermal power generation, 2016, 45(8): 68-74.
DOI:
LI Chuansheng. Engineering application of reheat steam temperature control mode for double-reheat tower boilers[J]. Thermal power generation, 2016, 45(8): 68-74.DOI:
Engineering application of reheat steam temperature control mode for double-reheat tower boilers
摘要
为解决二次再热塔式锅炉再热蒸汽调温的技术难题
本文在介绍现有调温方式及特点的基础上
以某1 000 MW机组二次再热塔式锅炉为例
提出了采用组合式高温受热面
一次再热器受热面和二次再热器受热面并列布置
一次再热器受热面和二次再热器受热面两级串联
一次再热器冷段和二次再热器冷段均布置辐射受热面等再热蒸汽调温设计方案
并取得了良好的效果
可为其他同类电厂工程设计提供参考。
Abstract
In order to solve the technical problems of reheat steam temperature control for double-reheat tower boilers
this paper presented the current methods and characteristics of reheat steam temperature regulation in double-reheat tower boilers.On this basis
by taking the reheat steam temperature regulation project in a double-reheat tower boiler as the example
a new rehat steam temperature adjustment scheme was put forward.In this scheme
the combined high temperature heating surface is applied
parallel arrangement and two-stage cascade arrangement of heating surface of the primary reheater and the secondary reheater are applied
and radiation heating surface is arranged at cold section of the secondary reheater.The application results show well reheat steam temperature control effect.