Economic analysis of steam seal modification for a steam turbine unit
|更新时间:2025-09-28
|
Economic analysis of steam seal modification for a steam turbine unit
Thermal Power GenerationVol. 45, Issue 10, Pages: 6-9(2016)
作者机构:
华北电力大学能源动力与机械工程学院
作者简介:
基金信息:
DOI:
CLC:TK268
Published:2016
稿件说明:
移动端阅览
DING Changfu, LI Zunping, LIU Zhibo. Economic analysis of steam seal modification for a steam turbine unit[J]. Thermal power generation, 2016, 45(10): 6-9.
DOI:
DING Changfu, LI Zunping, LIU Zhibo. Economic analysis of steam seal modification for a steam turbine unit[J]. Thermal power generation, 2016, 45(10): 6-9.DOI:
Economic analysis of steam seal modification for a steam turbine unit
摘要
针对汽轮机汽封漏汽严重问题
分析了梳齿汽封、侧齿汽封和蜂窝汽封工作机理及其泄漏量
据此
以某600 MW机组汽轮机汽封为例进行改造
将该汽封由原传统梳齿汽封改为蜂窝汽封和侧齿汽封
并进行了机组热力性能试验验证。结果表明:采用侧齿汽封和蜂窝汽封替换原汽轮机梳齿汽封后
汽轮机热耗率较改造前降低了249.74kJ/(kW·h)
改造效果良好。
Abstract
To solve the severe steam leakage problem caused by flow path steam seals and ensure the safety and economic operation of steam turbine units
the working mechanism and air leakage amount of labyrinth seal
side tooth seal and honeycomb seal were investigated.On this basis
the transformation were carried out for steam seals in a 600 MW unit.The original conventional labyrinth seal were modified into flank steam seal and honeycomb seal.Moreover
the unit thermal performance test was performed to verify the retrofitting effect.The results show that
after the modification
the heat consumption rate of the steam turbine decreased by 249.74kJ/(kW·h)
indicating the steam seal modification effect is well.