Numerical simulation on cooling effectiveness of gas film on tip of blade with groove and fins

LI Guangchao; ZHANG Zhandong; ZHANG Wei; KOU Zhihai; ZHAO Guochang

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

Numerical simulation on cooling effectiveness of gas film on tip of blade with groove and fins

更新时间：2025-09-28

- Numerical simulation on cooling effectiveness of gas film on tip of blade with groove and fins
- Thermal Power Generation Vol. 45, Issue 10, Pages: 23-28(2016)
- 作者机构：
  
  沈阳航空航天大学辽宁省航空推进系统先进测试技术重点实验室
- 作者简介：
- 基金信息：
- DOI：
  CLC： TK471
- Published：2016
- 稿件说明：
移动端阅览
LI Guangchao, ZHANG Zhandong, ZHANG Wei, et al. Numerical simulation on cooling effectiveness of gas film on tip of blade with groove and fins[J]. Thermal power generation, 2016, 45(10): 23-28.
DOI：

LI Guangchao, ZHANG Zhandong, ZHANG Wei, et al. Numerical simulation on cooling effectiveness of gas film on tip of blade with groove and fins[J]. Thermal power generation, 2016, 45(10): 23-28. DOI：

摘要

为了提高凹槽叶顶的气膜冷却效率

提出了一种凹槽带肋叶顶结构。通过数值模拟方法

研究了叶顶结构在不同吹风比、滑移壁面条件下冷却气体在凹槽腔内的流动状态和气膜冷却效率分布

揭示了凹槽带肋叶顶改善叶顶气膜冷却效率机理。结果表明:吹风比为0.5时

气膜孔附近冷却效率最高;吹风比为1.5时

凹槽内吸力面附近冷却效率最高;肋片导流作用使冷气更大范围地覆盖在凹槽内

提高了平均冷却效率

这种效应在吹风比为0.5时更明显。

Abstract

To enhance the cooling effectiveness of gas film on top of groove blade

a structure of groove blade with fins was proposed.The flow status and gas film cooling effectiveness distribution of cooling gas inside the groove were numerically simulated

under conditions with different blowing ratios and end wall slippage situations.The cooling effectiveness enhancement mechanism of the fins structure was revealed.The results show that

the highest cooling effectiveness appears near the film hole and the suction side at blowing ratio of 0.5and 1.5

respectively.The flow guidance effect the fins improves the film coverage

resulting in an increase in the average film cooling effectiveness on the squealer tip

especially at blowing ratio of 0.5.

关键词

Keywords

references

Views

172

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Investigation on film cooling effectiveness of fanned hole with broad outlet

Influence of coolant crossflow on film cooling effectiveness of one-inlet and double-outlet injection holes

Effect of oblique angle of turbine stator blade on flow field and energy conversion of steam in nozzle

Effect of wall thickness on film cooling effectiveness: numerical simulation

Numerical study on cooling performance of Nekomimi film holes

Related Author

CHEN Yukai

ZHAO Guochang

KOU Zhihai

LI Guangchao

ZHANG Wei

SHAN Baolong

ZHANG Aiping

ZHANG Yuanyuan

Related Institution

School of Aerospace Engineering, Shenyang University of Aeronautics and Astronautics

School of Energy and Power Engineering, Northeast Electric Power University

Zhongdian Shentou Power Generation Co., Ltd

Daya Bay Nuclear Power Operation Management Co., Ltd

Xi'an Thermal Power Research Institute Co., Ltd

AI问答

⁰