Effect of running temperature on thermal oxidation stability of phosphate ester fire-resistant oil
|更新时间:2025-09-28
|
Effect of running temperature on thermal oxidation stability of phosphate ester fire-resistant oil
Thermal Power GenerationVol. 46, Issue 3, Pages: 77-81(2017)
作者机构:
1. 北京京西燃气热电有限公司
2. 西安热工研究院有限公司
作者简介:
基金信息:
DOI:
CLC:TM621.8
Published:2017
稿件说明:
移动端阅览
JIN Jiangbo, WANG Xiaowei, JIANG Meng, et al. Effect of running temperature on thermal oxidation stability of phosphate ester fire-resistant oil[J]. Thermal power generation, 2017, 46(3): 77-81.
DOI:
JIN Jiangbo, WANG Xiaowei, JIANG Meng, et al. Effect of running temperature on thermal oxidation stability of phosphate ester fire-resistant oil[J]. Thermal power generation, 2017, 46(3): 77-81.DOI:
Effect of running temperature on thermal oxidation stability of phosphate ester fire-resistant oil
Deterioration of phosphate fire-resistant oil will directly affect the security and economy of the unit.To investigate the influencing factors of fire resistant-oil thermal oxidation
open-cup aging test of the fire-resistant oil was carried out at different temperatures
by combining the chain reaction principle of hydrocarbons free radicals oxidation with the analytical example of fire-resistant oil oxidized in a certain power-plant.The results show that
at temperatures below 60 ℃
the oil quality had no obvious change.When the temperature was increased from 60 ℃to 90 ℃
the acid value and resistivity of the oil changed a lot.With the continuous rise in temperature
precipitation appeared in the fire-resistant oil.At temperatures higher than 120 ℃
the resistivity of the oil had surpassed the standard of running oil.So it is concluded that running temperature is the key factor affecting thermal oxidation stability of the phosphate ester fireresistant oil.Therefore
it suggests the working temperature of the phosphate ester fire-resistant oil should be controlled within 35℃to 55℃
and the opening degree of the oil cooler should be monitored during the unit startup/stop process and working state
to prevent thermal oxidation of the fire-resistant oil and ensure safe operation of the speed regulating system.