Numerical Simulation and Experimental Study for Low-pressure Direct-current Glow Discharge

ZHANG Bailing; WANG Yutian; LI Yiwen; FAN Hao; GAO Ling; DUAN Chengduo

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

Numerical Simulation and Experimental Study for Low-pressure Direct-current Glow Discharge

更新时间：2025-12-08

- Numerical Simulation and Experimental Study for Low-pressure Direct-current Glow Discharge
- Vol. 42, Issue 3, Pages: 724-730(2016)
- 作者机构：
  
  1. 空军工程大学等离子体动力学重点实验室
  2. 西北工业大学航天学院燃烧热结构与内流场重点实验室
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published Online：31 March 2016，
  
  Published：2016
- 稿件说明：
移动端阅览
ZHANG Bailing, WANG Yutian, LI Yiwen, et al. Numerical Simulation and Experimental Study for Low-pressure Direct-current Glow Discharge[J]. 2016, 42(3): 724-730.
DOI：

ZHANG Bailing, WANG Yutian, LI Yiwen, et al. Numerical Simulation and Experimental Study for Low-pressure Direct-current Glow Discharge[J]. 2016, 42(3): 724-730. DOI：

摘要

为进一步探究低气压直流辉光放电机理

建立了基于局部平衡假设的2维直流辉光放电模型

研究了正常辉光向异常辉光放电的转变过程及其放电特性

并将异常辉光放电数值模拟结果与实验结果进行对比分析。结果表明

正常辉光放电时

在放电电压小幅增大的情况下

放电区域的扩大使放电电流增大

阴极位降区厚度减小

并出现明显的负辉光区。进一步增大放电电压

放电将覆盖整个阴极表面

可以明显区分出阴极位降区、负辉光区和正柱区

此时放电转变为异常辉光放电;放电电压为400 V时的阴极位降区电场强度高达3 200 V/cm。异常辉光放电、气压不变时

增大放电电压不会改变放电结构

但负辉光区的电子数密度增大使电流增大、放电增强;放电电压为400 V且气压在50

20 Pa之间时

放电电流将随气压的升高而增大。

Abstract

In order to further explore the mechanism of direct-current glow discharge at low pressure

we proposed a two-dimensional DC discharge model based on local equilibrium approximation. Then we investigated the process of transition from normal to abnormal glow and their characteristics

and compared the numerical simulation results of abnormal glow with experiment results. The results show that

in normal glow discharge

when the voltage increases slightly

the current increases as a result of the increase of discharge region

the thickness of cathode fall decreases

and the negative glow becomes manifest; when the voltage further increases

discharge region covers the whole surface of cathode

and can distinguish cathode fall

negative glow

and positive column regions

then the normal glow translates to the abnorma

l glow. The electrical field in cathode fall is 3 200 V/cm when the voltage is 400 V. When discharge is abnormal glow and gas pressure is constant

the increase of voltage can not change the structure of discharge

the current increases and discharge enhances because of the increase of electron number density in the negative glow; when voltage is 400 V and the air pressure is in the range of 50

20 Pa

the discharge current increases with the gas pressure.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

High-frequency Repetitive LTD Based on Semiconductor Switches

Discharge Characteristic of Dielectric Barrier Discharge with Low Flow Rate Under Atmosphere Pressure with Argon

Regeneration of Acid Orange 7-exhausted Granular Activated Carbon with Pulsed Discharge Plasma

Effectiveness Verification of Novel Air-blast Arc-quenching Device Based on Navier-Stokes Equations

Influence of Preionization on the Irradiation Characteristics of High-power Xenon Flashlamps

Related Author

JIANG Weihua

LIU Shiwei

JIANG Nan

WANG Shiqiang

GUO Yafeng

LI Jie

WU Yan

CHU Jinyu

Related Institution

Nagaoka University of Technology

School of Electrical Engineering, Dalian University of Technology

Qingdao Institute of Safety Engineering, China Petroleum & Chemical Corporation

School of the Environment, Jiangsu University

School of Electrical Engineering, Guangxi University

AI问答

⁰