Comparisons of Methods for Determining Corona Onset Voltage of Smooth DC Conductors

LI Xuebao; WANG Donglai; ZHANG Jinglan; CUI Xiang; LU Tiebing

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

Comparisons of Methods for Determining Corona Onset Voltage of Smooth DC Conductors

更新时间：2025-12-08

- Comparisons of Methods for Determining Corona Onset Voltage of Smooth DC Conductors
- Vol. 45, Issue 6, Pages: 1851-1856(2019)
- 作者机构：
  
  1. 华北电力大学新能源电力系统国家重点实验室
  2. 国网冀北电力有限公司电力科学研究院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published Online：30 June 2019，
  
  Published：2019
- 稿件说明：
移动端阅览
LI Xuebao, WANG Donglai, ZHANG Jinglan, et al. Comparisons of Methods for Determining Corona Onset Voltage of Smooth DC Conductors[J]. 2019, 45(6): 1851-1856.
DOI：

LI Xuebao, WANG Donglai, ZHANG Jinglan, et al. Comparisons of Methods for Determining Corona Onset Voltage of Smooth DC Conductors[J]. 2019, 45(6): 1851-1856. DOI：

摘要

直流电晕放电会产生空间电荷、离子流场、无线电干扰、可听噪声及电晕损耗等效应

为了研究根据不同的直流电晕放电效应得到的起晕电压差异

搭建了基于同轴圆柱结构的电晕放电起晕电压测试平台

同时测量了不同直径光滑导线电晕放电产生的离子流、合成电场、稳态电晕电流及紫外光子数随电压的变化关系

依据各物理量随电压变化的拐点确定了正、负极性光滑导线的起晕电压。实验结果表明

对于光滑导线

通过不同电晕放电效应借助于拐点法得到的起晕电压基本一致。根据同轴圆柱离子流场的解析公式及起晕场强的经验公式

对导线的起晕电压进行了计算

不同直径的起晕电压的计算结果与测量结果基本一致

最大差异<2.1%。因此

对于实验室内光滑导线起晕电压的确定

建议采用同轴圆柱电极结构对电晕放电效应进行测量

推荐采用拐点法来确定起晕电压。

Abstract

The multiple corona effects

such as space charges

ionized field

radio interference

audible noise and corona losses

etc

can be generated along with the corona discharge. In order to investigate the differences of corona onset voltages generated by different corona effects

a platform using the cylinder corona cage for determining the corona onset voltage was set up. The ion current densities

ionized fields

steady corona current

and ultraviolet photons from smooth conductors with different diameters were measured simultaneously in the experiments. Comparisons of the corona onset voltages from different corona effects are given through the inflexion-point method. Besides

numerical simulations for the corona onset voltage are also presented on the basis of the analytical formulas for ionized field of cylinder structure and the empirical formulas for onset electric field. The calculated results of the corona onset voltages for different conductors can match the measured ones

and the maximum error is less than 2.1%. Therefore

we proposed to use the cylinder corona cage to measure the multiple corona effects and to use the inflexion-point method to determine the corona onset voltage for the smooth conductor.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on the Calibration Method of Radio Interference Measurement Result at the Low-voltage Side of Corona Cage

Influence of Conductor Surface’s Contamination on Spectrum Characteristics of Audible Noise from Single Corona Point Under Positive DC Voltage

Effects of Altitude on Radio Interference of AC Power Lines

Corona Performance of Coated Conductors Under Raining Condition

Measurement Method of Corona Onset Voltage Based on Ozone Detection Technology

Related Author

HE Jinliang

ZHANG Bo

GUO Jian

WANG Wenzhuo

WANG Liming

WANG Yuanjiu

ZHANG Chuyan

YI Yong

Related Institution

China Electric Power Research Institute

Department of Electrical Engineering, Tsinghua University

Graduate School at Shenzhen, Tsinghua University

Electric Power Research Institute,State Grid Qinghai Electric Power Company

School of Electrical Engineering, Wuhan University

AI问答

⁰